[4898] in linux-scsi channel archive
Re: Getting Adaptec 1505 to work
daemon@ATHENA.MIT.EDU (Craig Castle)
Thu Oct 15 03:45:55 1998
Date: Wed, 14 Oct 1998 12:23:37 -0600
From: Craig Castle <craig.castle@mail.coderite.com>
To: discuss@ntlug.org, James Corona <jcorona@bigtex.ci.dallas.tx.us>,
linux-scsi@vger.rutgers.edu
I don't remember this clearly (it's been a couple of years), but is there
not a special FAQ on BIOS-less SCSI cards? The 1505 falls into this
category. It's also a really cheesy card. If this is something of any
level of importance, I'd buy a better SCSI card. The 1505 is really a
bottom-of-the-barrel product.
-----------------------------------------------------------------------------
------------------
From: James Corona <jcorona@bigtex.ci.dallas.tx.us>
Subject: Getting Adaptec 1505 to work
Date: Wed, 14 Oct 1998 09:48:19 -0500
To: discuss@ntlug.org, linux-scsi@vger.rutgers.edu
I am fairly new to the Linux world = until this=20 point I have used IDE
devices with no problems. I need to
add a = SCSI tape=20 drive the the system and am trying to get Linux to
recognize the 1505=20 card. I tryed
to load the module manually and attempted to make = the change=20 to the
lilo.conf as described in the
SCSI-HOWTO file to use the correct = address=20 but with no success. Booting
with the DOS drivers finds
the card. = If=20 anyone has this card working could you please explain
what you have=20 done.
CONFIGURATION
SCSI card 0x340 = int=3D11
--- End of Original Message
-----------------------------------------------------------------------------
------------------
--------------------------------------------------------
Name: Craig Castle
E-mail: Craig Castle <craig.castle@mail.coderite.com>
Date: 10/14/98
Time: 12:23:37
-------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
