[4831] in linux-scsi channel archive
Re: aic7xxx testers needed
daemon@ATHENA.MIT.EDU (Doug Ledford)
Wed Oct 7 04:05:29 1998
Date: Wed, 07 Oct 1998 03:02:01 -0500
From: Doug Ledford <dledford@dialnet.net>
To: Rolf Fokkens <rolf@flits102-126.flits.rug.nl>
CC: linux-scsi@vger.rutgers.edu
Rolf Fokkens wrote:
>
> > The aic7xxx-5.1.0-pre13 driver has just been released. This driver is
> what
> > I consider to be a final release candidate (except the debugging stuff
> is
> > still enabled). I would ask as many people as possible to please try
> this
> > version of the driver out and let me know if you have problems. If I
> don't
> > here back from people that there are problems in this driver, then it
> will
> > shortly become the official aic7xxx-5.1.0 driver for linux.
>
> Serious problems here with pre13. The boot sequence now looks like this:
>
> (scsi0) Downloading sequencer code... 419 instructions downloaded
> scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI)
> 5.1.13pre13/3.2.4
> <Adaptec AHA-294X Ultra SCSI host adapter>
> scsi : 1 host.
> (scsi0:0:1:0) Synchronous at 20.0 Mbyte/sec, offset 15
> scsi0: channel 0 target 1 lun 0 request sense failed, performing reset
> SCSI bus being reset for host 0 channel 0
>
> And this is all that happens. The pre15 I tried show the same.
[ snip ]
Let me know if pre16 fixes this problem.
--
Doug Ledford <dledford@dialnet.net>
Opinions expressed are my own, but
they should be everybody's.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
