[4823] in linux-scsi channel archive
aic7xxx-5.1.x failure on 2.1.123
daemon@ATHENA.MIT.EDU (Claudiu Balciza)
Tue Oct 6 03:50:08 1998
From: "Claudiu Balciza" <cbalciza@geocities.com>
To: "Linux SCSI" <linux-scsi@vger.rutgers.edu>, <dledford@dialnet.net>
Date: Tue, 6 Oct 1998 10:22:45 +0300
I've been using 2.1.x kernels since 2.1.119 and the last one working for me
is 2.1.122 (Digital Server 3200 - 2xPII 266/128MB/AIC7880 + 2x4GB Seagate
drives)
here's the 2.1.122 probing:
--------------------------------------------------------
(scsi0) <Adaptec AIC-7880 Ultra SCSI host adapter> found at PCI 12/0
(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi0) BIOS enabled, IO Port 0x7000, IRQ 11
(scsi0) IO Memory at 0xfebff000, MMAP Memory at 0xc8800000
(scsi0) Resetting channel
(scsi0) Downloading sequencer code... 413 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.0.20/3.2.4
<Adaptec AIC-7880 Ultra SCSI host adapter>
scsi : 1 host.
(scsi0:0:-1:-1) Scanning channel for devices.
Vendor: SEAGATE Model: ST34371W Rev: 0702
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: SEAGATE Model: ST34371W Rev: 0702
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: TOSHIBA Model: CD-ROM XM-5701TA Rev: 0557
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
scsi : detected 1 SCSI cdrom 2 SCSI disks total.
(scsi0:0:5:0) Synchronous at 10.0MHz, offset 8.
Uniform CDROM driver Revision: 2.14
(scsi0:0:0:0) Using wide (16 bit) transfers.
(scsi0:0:0:0) Synchronous at 20.0MHz, offset 8.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8388314 [4095 MB] [4.1 GB]
(scsi0:0:1:0) Using wide (16 bit) transfers.
(scsi0:0:1:0) Synchronous at 20.0MHz, offset 8.
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8388314 [4095 MB] [4.1 GB]
--------------------------------------------------------
the 2.1.123 hangs on SCSI (with or without the pre 15 patch)
After the sequencer download it starts getting aborts due to timeout on
every device
Then it stops. Definitely.
I would send you the output I could capture it.
do you think any of the:
aic7xxx=panic_on_abort
aic7xxx=verbose:0x1ffff
would help ?
ing.Claudiu Balciza
ALTEX IMPEX srl
str.Stefan Cel Mare nr.6
5600 Piatra Neamt
Romānia
tel: +40 33 210671, 210672
fax: +40 33 230817
e-mail:
business: altex@csc.ro
home: cbalciza@geocities.com
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
