[4612] in linux-scsi channel archive
Re: AHA1542 and dev kernel 115
daemon@ATHENA.MIT.EDU (GoatBoy)
Tue Aug 25 23:28:48 1998
Date: Tue, 25 Aug 1998 18:15:46 -0400 (EDT)
From: GoatBoy <goatboy@twotone.representation.net>
To: Riccardo Facchetti <fizban@tin.it>
cc: Eric Youngdale <eric@andante.jic.com>, linux-scsi@vger.rutgers.edu,
linux-kernel mailing list <linux-kernel@vger.rutgers.edu>
In-Reply-To: <Pine.LNX.4.02.9808242122050.1209-100000@azuth.tin.it>
there is always the possibility that you are using a ps/2 mouse that uses
irq 12 by default... but that is just a possibility... sorry if i am
wrong...
_.
__ ___| !__
\ ` | | aaron pratt - goatboy
| ` / ` | twotone.representation.net
|___ !__,__\ aaronp@linworth.org
/_____|goatboy@twotone.representation.net
-----------------------------------------
On Mon, 24 Aug 1998, Riccardo Facchetti wrote:
> On Sun, 23 Aug 1998, Eric Youngdale wrote:
>
> > Yes, it would be handy to know exactly what the messages were.
> > Without this, it would be more or less impossible to guess what the
> > problem is.
> >
> > -Eric
> >
> > On Tue, 18 Aug 1998, Riccardo Facchetti wrote:
> >
> > > Is aha1542 meant to be working in 2.1.115 ?
>
> Found the problem.
> The aha1542cf (at least the one I own) don't work on IRQ 12. It works well
> on IRQ 10. I don't know why, but setting the controller to IRQ 10 resolved
> the problem (may be an hardware conflict).
>
> Anyway the exact messages was:
>
> Unable to abort command for target 0
> Trying device reset for target 0
> Sent BUS RESET to scsi host 0
>
> repeated again and again ... in no particular order (at least not
> particular to me).
>
> Ciao,
> Riccardo.
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html
>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
