[454] in linux-scsi channel archive
Problems with mke2fs and SCSI, 1.3.12+quotas
daemon@ATHENA.MIT.EDU (lilo)
Wed Aug 2 23:55:00 1995
Date: Wed, 2 Aug 1995 01:44:27 -0500 (CDT)
From: lilo <TaRDiS@mail.utexas.edu>
To: Linux SCSI Mailing List <linux-scsi@vger.rutgers.edu>
Hi,
I'm running a Fujitsu 230MB magneto-optical drive on a Buslogic 445C
controller. When running `mke2fs -v /dev/sda1', immediately after the
`filesystem accounting information:' I get:
Attempt to allocate device channel 0, target 0, lun 0
Kernel panic: No device found in allocate_device
No other information and the system dies.
Excerpt from my dmesg:
BusLogic SCSI: buslogic_detect: configuring VESA HA at port 0x134, IRQ 12,
BIOS 0xDC000, ID 7
BusLogic SCSI: buslogic_detect: Model Number: 44xC (revision 0)
BusLogic SCSI: buslogic_detect: firmware revision: 4.21
scsi0 : BusLogic SCSI driver 1.15
scsi : 1 host.
Vendor: FUJITSU Model: M2512A Rev: 1314
Type: Optical Device ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
scsi : detected 1 SCSI disk total.
I tried the same command on /dev/fd0, no problems. Any assistance or a
starting point would be greatly appreciated. I'm running 1.3.12 and quotas,
and the error occurs consistently with my MO drive.
lilo
