[4525] in linux-scsi channel archive

home help back first fref pref prev next nref lref last post

SCSI AHA 2940 gives lun (0;-1;-1)

daemon@ATHENA.MIT.EDU (Quoc-Viet Ha)
Tue Aug 11 13:59:15 1998

From: Quoc-Viet Ha <qvha@ubisoft.com>
To: linux-scsi@vger.rutgers.edu
Date: 	Tue, 11 Aug 1998 10:59:16 -0700

hi,

kernel 103 is working for me, but none of the next one including 115 will
boot on my computer.
It will loop over the SCSI chain detection with a lun (0;-1;-1) message,
"trying harder", etc.

this a dump of my kern.log booting on 103

Viet

Aug 10 09:51:05 rogue kernel: Loaded 6563 symbols from
/boot/System.map-2.1.103.
Aug 10 09:51:05 rogue kernel: Symbols match kernel version 2.1.103.
Aug 10 09:51:05 rogue kernel: No module symbols loaded.
Aug 10 09:51:05 rogue kernel: Linux version 2.1.103 (root@rogue) (gcc
version 2.7.2.3) #1 SMP Mon Jul 6 12:08:35 PDT 1998 
Aug 10 09:51:05 rogue kernel: Console: 16 point font, 400 scans 
Aug 10 09:51:05 rogue kernel: Console: colour VGA+ 80x25, 1 virtual console
(max 63) 
Aug 10 09:51:05 rogue kernel: Calibrating delay loop... 298.19 BogoMIPS 
Aug 10 09:51:05 rogue kernel: Memory: 30672k/32768k available (1036k kernel
code, 400k reserved, 616k data, 44k init) 
Aug 10 09:51:05 rogue kernel: Swansea University Computer Society NET3.039
for Linux 2.1 
Aug 10 09:51:05 rogue kernel: NET3: Unix domain sockets 0.16 for Linux
NET3.038. 
Aug 10 09:51:05 rogue kernel: Swansea University Computer Society TCP/IP for
NET3.037 
Aug 10 09:51:05 rogue kernel: IP Protocols: ICMP, UDP, TCP 
Aug 10 09:51:05 rogue kernel: Checking 386/387 coupling... Ok, fpu using
exception 16 error reporting. 
Aug 10 09:51:05 rogue kernel: Checking 'hlt' instruction... Ok. 
Aug 10 09:51:05 rogue kernel: Intel Pentium with F0 0F bug - workaround
enabled. 
Aug 10 09:51:05 rogue kernel: POSIX conformance testing by UNIFIX 
Aug 10 09:51:05 rogue kernel: CPU0: Intel Pentium MMX stepping 04 
Aug 10 09:51:05 rogue kernel: SMP motherboard not detected. Using dummy APIC
emulation. 
Aug 10 09:51:05 rogue kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdab4 
Aug 10 09:51:05 rogue kernel: PCI: Using configuration type 1 
Aug 10 09:51:05 rogue kernel: PCI: Probing PCI hardware 
Aug 10 09:51:05 rogue kernel: Starting kswapd v 1.5  
Aug 10 09:51:05 rogue kernel: Serial driver version 4.25 with enabled 
Aug 10 09:51:05 rogue kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A 
[ ..
When I warm boot, my computer hangs here
..]
Aug 10 09:51:05 rogue kernel: Sound initialization started 
Aug 10 09:51:05 rogue kernel: <Sound Blaster 16 (4.11)> at 0x220 irq 7 dma
1,5 
Aug 10 09:51:05 rogue kernel: <Sound Blaster 16> at 0x330 irq 7 dma 0 
Aug 10 09:51:05 rogue kernel: Sound initialization complete 
Aug 10 09:51:05 rogue kernel: Ramdisk driver initialized : 16 ramdisks of
4096K size 
Aug 10 09:51:05 rogue kernel: loop: registered device at major 7 
Aug 10 09:51:05 rogue kernel: PIIX3: IDE controller on PCI bus 00 dev 39 
Aug 10 09:51:05 rogue kernel: PIIX3: not 100% native mode: will probe irqs
later 
Aug 10 09:51:05 rogue kernel:     ide0: BM-DMA at 0xfc90-0xfc97, BIOS
settings: hda:pio, hdb:pio 
Aug 10 09:51:05 rogue kernel:     ide1: BM-DMA at 0xfc98-0xfc9f, BIOS
settings: hdc:pio, hdd:pio 
Aug 10 09:51:05 rogue kernel: Floppy drive(s): fd0 is 1.44M 
Aug 10 09:51:05 rogue kernel: FDC 0 is a post-1991 82077 
Aug 10 09:51:05 rogue kernel: md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 
Aug 10 09:51:05 rogue kernel: linear personality registered 
Aug 10 09:51:05 rogue kernel: (scsi0) <Adaptec AHA-294X Ultra SCSI host
adapter> found at PCI 17/0 
Aug 10 09:51:05 rogue kernel: (scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs

Aug 10 09:51:05 rogue kernel: (scsi0) BIOS enabled, IO Port 0xf400, IRQ 11 
Aug 10 09:51:05 rogue kernel: (scsi0) IO Memory at 0xfdffe000, MMAP Memory
at 0xc280c000 
Aug 10 09:51:05 rogue kernel: (scsi0) Downloading sequencer code... 413
instructions downloaded 
Aug 10 09:51:05 rogue kernel: scsi0 : Adaptec AHA274x/284x/294x
(EISA/VLB/PCI-Fast SCSI) 5.0.13/3.2.4 
Aug 10 09:51:05 rogue kernel:        <Adaptec AHA-294X Ultra SCSI host
adapter> 
Aug 10 09:51:05 rogue kernel: scsi : 1 host. 
Aug 10 09:51:05 rogue kernel: (scsi0:0:-1:-1) Scanning channel for devices. 
Aug 10 09:51:05 rogue kernel: (scsi0:0:0:0) Synchronous at 10.0MHz, offset
15. 
Aug 10 09:51:05 rogue kernel:   Vendor: CONNER    Model: CFP2107E  2.14GB
Rev: 1524 
Aug 10 09:51:05 rogue kernel:   Type:   Direct-Access
ANSI SCSI revision: 02 
Aug 10 09:51:05 rogue kernel: Detected scsi disk sda at scsi0, channel 0, id
0, lun 0 
Aug 10 09:51:05 rogue kernel: (scsi0:0:3:0) Synchronous at 10.0MHz, offset
15. 
Aug 10 09:51:05 rogue kernel:   Vendor: PLEXTOR   Model: CD-ROM PX-12TS
Rev: 1.01 
Aug 10 09:51:05 rogue kernel:   Type:   CD-ROM
ANSI SCSI revision: 02 
Aug 10 09:51:05 rogue kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0,
id 3, lun 0 
Aug 10 09:51:05 rogue kernel: (scsi0:0:4:0) Synchronous at 20.0MHz, offset
15. 
Aug 10 09:51:05 rogue kernel:   Vendor: IBM       Model: DORS-32160
Rev: WA6A 
Aug 10 09:51:05 rogue kernel:   Type:   Direct-Access
ANSI SCSI revision: 02 
Aug 10 09:51:05 rogue kernel: Detected scsi disk sdb at scsi0, channel 0, id
4, lun 0 
Aug 10 09:51:05 rogue kernel: scsi : detected 1 SCSI cdrom 2 SCSI disks
total. 
Aug 10 09:51:05 rogue kernel: Uniform CD-ROM driver Revision: 2.12 
Aug 10 09:51:05 rogue kernel: SCSI device sda: hdwr sector= 512 bytes.
Sectors= 4194304 [2048 MB] [2.0 GB] 
Aug 10 09:51:05 rogue kernel: SCSI device sdb: hdwr sector= 512 bytes.
Sectors= 4226725 [2063 MB] [2.1 GB] 
Aug 10 09:51:05 rogue kernel: eth0: 3Com 3c905 Boomerang 100baseTx at
0xfcc0, 00:60:97:a0:13:d4, IRQ 9 
Aug 10 09:51:05 rogue kernel:   8K word-wide RAM 3:5 Rx:Tx split,
autoselect/MII interface. 
Aug 10 09:51:05 rogue kernel: eth0: MII transceiver found at address 24. 
Aug 10 09:51:05 rogue kernel:   Enabling bus-master transmits and
whole-frame receives. 
Aug 10 09:51:05 rogue kernel: 3c59x.c:v0.47H 12/4/97 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html 
Aug 10 09:51:05 rogue kernel: Partition check: 
Aug 10 09:51:05 rogue kernel:  sda: sda1 sda2 sda3 
Aug 10 09:51:05 rogue kernel:  sdb: sdb1 
Aug 10 09:51:05 rogue kernel: VFS: Mounted root (ext2 filesystem) readonly. 
Aug 10 09:51:05 rogue kernel: Freeing unused kernel memory: 44k freed 
Aug 10 09:51:05 rogue kernel: Adding Swap: 130748k swap-space (priority -1) 
Aug 10 09:51:05 rogue kernel: VFS: Disk change detected on device 0b:00 
Aug 10 09:51:05 rogue kernel: ISO9660 Extensions: Microsoft Joliet Level 1 
Aug 10 16:51:10 rogue kernel: Appletalk 0.18 for Linux NET3.037 




-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu

home help back first fref pref prev next nref lref last post