[4402] in linux-scsi channel archive
Re: Two hard drivers for Adaptec AHA-294X UW
daemon@ATHENA.MIT.EDU (Viktor Borisov)
Sat Jul 18 04:11:03 1998
Date: Thu, 16 Jul 1998 07:02:55 -0400
From: Viktor Borisov <blaster@sync-sys.com>
Reply-To: borisov@sync-sys.com
To: Mark Garlanger <garlangr@cyberramp.net>
CC: borisov@sync-sys.com, "McGee, Chris" <CMMcGee@Pella.com>,
linux-scsi@vger.rutgers.edu
Oh, it does work with 2.0.34!!!
Thanks everybody,
Viktor Borisov
PS If you want to see a resalt of this - check out www.amnesi.com
Mark Garlanger wrote:
> Viktor,
>
> Missed your original message, but had some major problems with 2.0.33
> when using more than one harddrive and the aic7xxx. I tried with both
> a Micropolis 8.7 U/W HD and a ZIP Drive (with the ppa driver), and
> the Microplis and a IBM 2.1 U/W HD. Both configurations would cause
> a SCSI bus timeout. Changing to 2.0.34 fixed the problem.
>
> Mark
>
> Viktor Borisov wrote:
>
> > I have checked it very carefully. It is terminated right. Plus I can format
> > second drive from SCSI utility. Do you know any others reasons. I am
> > desperate to find a clue...
> >
> > Cheers,
> > Viktor
> >
> > McGee, Chris wrote:
> >
> > > Having the same LUN is OK. Is your termination set right? Only the last
> > > drive in the chain should be terminated; if both are it will screw you
> > > up.
> > >
> > > --Chris
> > >
> > > > -----Original Message-----
> > > > From: Viktor Borisov [SMTP:blaster@sync-sys.com]
> > > > Sent: Saturday, July 11, 1998 9:47 PM
> > > > To: linux-scsi@vger.rutgers.edu
> > > > Subject: Two hard drivers for Adaptec AHA-294X UW
> > > >
> > > > Gentlemen,
> > > >
> > > > I am running Linux 2.0.33 with Adaptec AHA-294X Ultra SCSI host
> > > > adapter.
> > > > I had one Western Digital Enterprise drive. Now I added another (IBM
> > > > OEM
> > > > DFHSS4W) and I cannot load my linux anymore. At a boot time it detects
> > > > both drivers, but then it cannot connect to the first one.
> > > > Here is the error:
> > > >
> > > > scsi : detected 2 SCSI disks total.
> > > > SCSI device sda: hdwr sector= 512 bytes. Sectors= 4254819 [2077 MB]
> > > > (scsi0:0:1:0) No active SCB for reconecting target - Issuing BUS
> > > > DEVICE
> > > > RESET.
> > > > SAVED_TCL=0x10, ARG_1=0xff, SEQADDR=0x10c
> > > > scsi0: Unexpected busfree, LASTPHASE = 0xa0, SEQADDR = 0xa0
> > > > (scsi0:0:1:0) Using 16 bit (Wide)transfers.
> > > > (scsi0:0:1:0) sending replay SDTR
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.rutgers.edu
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
