[4325] in linux-scsi channel archive
Re: your mail
daemon@ATHENA.MIT.EDU (Jeff Noxon)
Thu Jul 9 13:02:41 1998
Date: Thu, 9 Jul 1998 11:59:42 -0500
From: Jeff Noxon <jeff@planetfall.com>
To: Robin Mecklenburgh <Robin.Mecklenburgh@earth.ox.ac.uk>,
linux-scsi@vger.rutgers.edu
In-Reply-To: <Pine.GSO.3.96.980709174728.10789A-100000@ford>; from Robin Mecklenburgh on Thu, Jul 09, 1998 at 05:54:02PM +0100
I haven't been able to use that board reliably on many systems.
The default address should be detected though: IO 330, IRQ 11, DMA 5
If you can't use those settings, you'll have to read the docs and tell
Linux where to find the card.
Jeff
On Thu, Jul 09, 1998 at 05:54:02PM +0100, Robin Mecklenburgh wrote:
> Is it possible to get an AHA1540CF adaptec scsi board to work with linux?
> I am running 2.0.30 kernel (redhat).
>
> I looked in the redhat 5.1 documentation and the exact model was not
> listed.
>
> When I try to install the card it doesn't detect the device. The standard
> card settings that I am using are irq=12, dma=7,id=7 these can be changed
> in the cards BIOS.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
