[4222] in linux-scsi channel archive
SCSI Boot Problem with 2.0.34 SMP
daemon@ATHENA.MIT.EDU (Frederick F. Gleason)
Thu Jun 25 23:59:58 1998
Date: Thu, 25 Jun 1998 20:23:11 -0400 (EDT)
From: "Frederick F. Gleason" <fredg@wava.com>
To: linux-scsi@vger.rutgers.edu, linux-smp@rutgers.edu
Having problems booting 2.0.34 compiled for SMP. Keep getting the
following at boot-time:
.
.
.
SCSI Host 0 Abort (pid 4) timed out - resetting
SCSI bus is being reset for host 0 channel 0
SCSI Host 0 Channel 0 reset (pid 4) timed out - trying harder
SCSI bus is being reset for host 0 channel 0
(scsi0:-1:-1:-1) Bad scbptr 255 during SELTO Referenced SCB 255 not valid
SCSISEQ=0x0 SEQADDR=0x0 SSTAT0=0x5 STAT1=0x88
.
.
.
There's lots more in the same vein, all of it seeming to be related to an
invalid scb of 255. The machine was quite stable with 2.0.33 SMP, and
also boots correctly with 2.0.34 UP.
The hardware is a dual PentiumPro 200 with 128 MB RAM, an Adaptec
AHA2940UW SCSI Controller, a Seagate ST19171W Fast/Wide Disk, a SCSI
CDROM and a 3Com 3C905-TX (Boomerang) NIC.
|Frederick F. Gleason, Jr.|WAVA Radio - 105 FM |Voice: 1-(703)-807-2266 |
| Chief Engineer |1901 N. Moore Street| FAX: 1-(703)-807-2248 |
| |Arlington, VA 22209 | Web: HTTP://www.wava.com|
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
