[4183] in linux-scsi channel archive

home help back first fref pref prev next nref lref last post

Re: Ultra Wide (aic-7880) only 20Mbyte/sec?

daemon@ATHENA.MIT.EDU (Matthias Andree)
Fri Jun 19 12:53:56 1998

From: Matthias Andree <mandree@sx1.HRZ.Uni-Dortmund.DE>
In-Reply-To: <199806181413.QAA17367@loki.gams.co.at> from Michael Lausch at "Jun 18, 98 04:13:34 pm"
To: mla@gams.co.at (Michael Lausch)
Date: 	Fri, 19 Jun 1998 17:38:15 +0200 (CEST)
Cc: linux-scsi@vger.rutgers.edu

Michael Lausch wrote:
> (scsi0) <Adaptec AIC-7880 Ultra SCSI host adapter> found at PCI 6/0
> (scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
> scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.0.18/3.2.4
>        <Adaptec AIC-7880 Ultra SCSI host adapter>
> (scsi0:0:0:0) Using wide (16 bit) transfers.
                           ^^^^^^^^
> (scsi0:0:0:0) Synchronous at 20.0MHz, offset 8.
                               ^^^^^^^
>   Vendor: IBM       Model: DCAS-34330W       Rev: S65A
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> 
> As far as i know, drives with ultra/wide SCSI interface should do 40
> MByte/sec. So why is this disk running at 20Mbyte/sec? The Controller
> BIOS is set up to do 40 MByte/sec on SCSI id 0. The disk shoudl do
> ultra SCSI according to IBM's web pages.

Wo steht da was von 20 MByte/s? Nirgends. Davon abgesehen, daß die DCAS mit
Glück knapp über 8 MB/s kommt (und damit nichtmals meinen schmalen
Fast-SCSI-Bus der CyberStorm Mk II im Amiga auslastet), steht Dein SCSI-Bus
dem Transfer nicht im Weg, denn 16 bit = 2 Byte. 2 Byte * 20 MHz =
40.000.000 Byte/s. Punktum.

Tip: 5.0.19 des AIC7xxx-Treibers ist verfügbar und enthält einige Bugfixes
in der Negotiation. Solltest Du mal Probleme mit anderen Geräten haben,
könnte das Update helfen. 

-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu

home help back first fref pref prev next nref lref last post