[3944] in linux-scsi channel archive
Re: AVA-1505
daemon@ATHENA.MIT.EDU (John Maweu)
Sun May 17 17:27:19 1998
Date: Sun, 17 May 1998 17:08:12 -0400
From: maweu@hubble.cau.edu (John Maweu)
To: hjtbd@tin.it
Cc: linux-scsi@vger.rutgers.edu
Hi all,
Emmanuel Carjat wrote:
> Enrico Demarin writes:
> > ...
> > Adaptec AVA-1505 (isa) , i'm using the kernel 2.1.101,
> > with no success.
> > I compiled it disabling the bios probe, as a module, i
> > initialize it with:
> >
> > insmod aha152x aha152x=0x140,12,7
> >
> > What i get is that it says "lost interrupt" and then insmod hangs there.
> >
> > The card works under windoze with the same irq and port configuration.
> ...
> work anymore but that's another story). I've made it working using the
> following steps:
> compiling the whole scsi stuff in the kernel (may be it works using
> modules but i haven't tried yet).
> at the lilo prompt (should be working with an append line in
> lilo.conf):
> aha152x=0x340,10
> ...
Interestingly, I have an AVA1505/1515 (isa) and got the "lost interrupt"
message with 2.0.33's aha152x driver when trying port 0x140. The card worked
on 0x340. Also, the card would only work on irq 11. And, yes, I _did_ fool
around with the jumpers as per the manual from Adptec's site.
What do you think about that?
-o-
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
