[3912] in linux-scsi channel archive
Using echo "scsi add-single-device 0 1 2 3"
daemon@ATHENA.MIT.EDU (Ulisses Alonso)
Wed May 13 04:11:20 1998
Date: Wed, 13 May 1998 07:28:59 +0000 (GMT)
From: Ulisses Alonso <ulisses@pusa.eleinf.uv.es>
Reply-To: ulisses@pusa.eleinf.uv.es
To: linux-scsi@vger.rutgers.edu
Hi all again!
An example,
this is a real /proc/scsi/scsi:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DDRS-39130W Rev: S92A
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: IBM Model: DDRS-39130W Rev: S92A
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: NEC Model: CD-ROM DRIVE:464 Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Now I want to add a device (eg: a DAT tape with SCSIid 1) to scsi0 (this
board has two aic7880)
It should be:
echo "scsi add-single-device 1 0 1 0"
isn't it?
regards,
Ulisses
-----------------------------------------------------------------------------
"Computers are useless. They can only give answers." Pablo Picasso
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
