[3777] in linux-scsi channel archive
One more last try (NEC-210 CD-ROM)
daemon@ATHENA.MIT.EDU (Neon Spiral Injector)
Sun Apr 26 19:10:48 1998
Date: Sun, 26 Apr 1998 18:23:48 -0400
From: Neon Spiral Injector <clubneon@safari.net>
To: linux-scsi@vger.rutgers.edu
This is a multi-part message in MIME format.
--------------0878334C69FCCF2229F4630F
Content-Type: text/plain; charset=iso-2022-jp
Content-Transfer-Encoding: 7bit
Okay, its Sunday, my weekly update day. This week I have desided to try to
get my CD-ROM drive working again.
Basic history:
The drive is an NEC-210 double speed SCSI, controlled by a PAS-16 Rev D. It
is in an external enclosure that is part of the Media Vision Memphis. Basicly
there is a 38 pin connector that runs from the sound card to the external box
that carries sound/midi/scsi info.
The drive/controller works great with DOS/Win95, hangs for about 5 minutes
when booting NT, but then boot continues and drive works fine after that.
When mounting in Linux hangs for 5 minutes, then spits out some errors and
sits there for ever.
I have spent quite some time hanging my machine to gather as much information
as I could. I'm sorry if this is kind of big (it is smaller than some of the
patches posted here :). Anyway if anyone has any ideas I'm willing to try
anything to get this to work (I want to be able to install Debian 2 from CD).
If this following text doesn't answer something that you want to know about
the machine just ask and if I don't know I'll find out.
--
Two penguins were walking on an iceberg. The first penguin said to the
second, "you look like you are wearing a tuxedo". The second penguin
said, "I might be".
--------------0878334C69FCCF2229F4630F
Content-Type: text/plain; charset=iso-2022-jp; name="cdrom.errors"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="cdrom.errors"
============== SCSI Boot Messages ==============
aha152x: BIOS test: passed, auto configuration: ok, detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x340, IRQ=11, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
aha152x: trying software interrupt, ok.
scsi1 : at 0x0388 irq 10 options CAN_QUEUE=32 CMD_PER_LUN=2 release=3 generic options AUTOPROBE_IRQ AUTOSENSE PSEUDO DMA UNSAFE generic release=7
scsi0 : Adaptec 152x SCSI driver; $Revision: 1.18 $
scsi1 : Pro Audio Spectrum-16 SCSI
scsi : 2 hosts.
Vendor: HP Model: C2234-300 Rev: 0B16
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: MAXTOR Model: LXT-213S Rev: 4.57
Type: Direct-Access ANSI SCSI revision: 01 CCS
Detected scsi disk sdb at scsi0, channel 0, id 3, lun 0
Vendor: NEC Model: CD-ROM DRIVE:210 Rev: 1.0
Type: CD-ROM ANSI SCSI revision: 01
Detected scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
scsi : detected 1 SCSI cdrom 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 641676 [313 MB] [0.3 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 415436 [202 MB] [0.2 GB]
============== Errors when trying to mount an empty drive ==============
sr_photocd: ioctl error (NEC): 0x28000000
CD-ROM I/O error: dev 0b:00, sector 64
isofs_read_super: bread failed, dev 0b:00 iso_blknum 16 block 32
mount: wrong fs type, bad option, bad superblock on /dev/cdrom,
or too many mounted file systems
CDROM not ready. Make sure there is a disc in the drive.
sr_photocd: ioctl error (NEC): 0x28000000
============== Errors when trying to mount an audio CD ==============
CD-ROM error: extra data not valid Current error sr0b:00: sense key Illegal Request
Additional sense indicates Logical block address out of range
command was: Request Sense 00 00 00 10 00
CD-ROM error: extra data not valid Current error sr0b:00: sense key Illegal Request
Additional sense indicates Logical block address out of range
command was: Request Sense 00 00 00 10 00
CD-ROM I/O error: dev 0b:00, sector 64
isofs_read_super: bread failed, dev 0b:00 iso_blknum 16 block 32
mount: wrong fs type, bad option, bad superblock on /dev/cdrom,
or too many mounted file systems
============== Errors when trying to mount a CD-ROM ==============
scsi : aborting command due to timeout : pid 4236, scsi1, channel 0, id 0, lun 0 Read (6) 00 00 10 01 00
scsi1 : aborting command
scsi1 : destination target 0, lun 0
command = Read (6) 00 00 10 01 00
NCR5380 : coroutine is running.
STATUS_REG: 64 ,BSY,REQ,IO
PASR: 48
ICR: 00
MODE: 02 ,MODE DMA
scsi1 : phase DATAIN
NCR5380 core release=7. PAS16 release=3
Base Addr: 0x00000 io_port: 0388 IRQ: 10.
Highwater I/O busy_spin_counts -- write: 0 read: 0
NCR5380 : coroutine is running.
scsi1 : destination target 0, lun 0
command = Read (6) 00 00 10 01 00
scsi1: issue_queue
scsi1: disconnected_queue
scsi1 : aborting command
scsi1 : destination target 0, lun 0
command = Read (6) 00 00 10 01 00
NCR5380 : coroutine is running.
STATUS_REG: 64 ,BSY,REQ,IO
PASR: 48
ICR: 00
MODE: 02 ,MODE DMA
scsi1 : phase DATAIN
NCR5380 core release=7. PAS16 release=3
Base Addr: 0x00000 io_port: 0388 IRQ: 10.
Highwater I/O busy_spin_counts -- write: 0 read: 0
NCR5380 : coroutine is running.
scsi1 : destination target 0, lun 0
command = Read (6) 00 00 10 01 00
scsi1: issue_queue
scsi1: disconnected_queue
============== `cat /proc/scsi/scsi` ==============
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HP Model: C2234-300 Rev: 0B16
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: MAXTOR Model: LXT-213S Rev: 4.57
Type: Direct-Access ANSI SCSI revision: 01 CCS
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: NEC Model: CD-ROM DRIVE:210 Rev: 1.0
Type: CD-ROM ANSI SCSI revision: 01
============== `cat /proc/scsi/aha152x/0` ==============
Adaptec 152x SCSI driver; $Revision: 1.18 $
ioports 0x0340 to 0x035f
interrupt 0x0b
disconnection/reconnection enabled
parity checking enabled
synchronous transfers disabled
0 commands currently queued
enabled debugging options: (abort) (reset)
queue status:
no not yet issued commands
no current command
no disconnected commands
waiting: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (lo); SSTAT (SWRAP BUSFREE PHASECHG ); SSTAT (); SXFRCTL0 (CH1 ); SIGNAL (); SELID (88), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0), OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO WRITE INTEN ); DMASTAT (WORDRDY DFIFOEMP )
enabled interrupts ()
============== `cat /proc/scsi/pas16/1` ==============
NCR5380 core release=7. PAS16 release=3
Base Addr: 0x00000 io_port: 0388 IRQ: 10.
Highwater I/O busy_spin_counts -- write: 0 read: 0
NCR5380 : coroutine isn't running.
scsi1: no currently connected command
scsi1: issue_queue
scsi1: disconnected_queue
--------------0878334C69FCCF2229F4630F--
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
