|
|
|
|
|
|
|
|
|
|
|
|
| home | help | back | first | fref | pref | prev | next | nref | lref | last | post |
Date: Wed, 8 Apr 1998 16:45:40 +0200 (CEST) From: Christian Zobel <zobel@ph2.Uni-Koeln.DE> To: linux-scsi@vger.rutgers.edu Hello, I have a problem getting started with my (rather old) Scanner -- Mustek MFS-8000SP. It's connected to a NCR53c810a. I tried already the new (up to 2.6b) Patches to the NCR-driver -- without any change. What I get: The Scanner is ON. Booting starts. Bios recognizes Mustek-Scanner at startup, but the message seems to be some kind of disturbed. Linux-booting ends in SCSI-errors, namely unexpected disconnect restarting I tried the NCR-driver with any possible combination of option setting. Because of the disturbed Mustek-enblem at Bios-startup I thought about a termination problem, but I am quite sure to have the right resistor setting on my NCR, and the scanner has two connectors of which the second is passively terminated. So what could be wrong?! Further Infos: The scanner is the only SCSI-device and set to ID6 -- other one have been chosen, too. Board: Gigabyte GA586ATV with P133 and 32MD RAM HDD: Seagate ST3850A Thanx, Christian Zobel +++++ zobel@ph2.uni-koeln.de +++++ - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.rutgers.edu
|
|
|
|
|
|
|
|
|
|
|
|
| home | help | back | first | fref | pref | prev | next | nref | lref | last | post |