[3482] in linux-scsi channel archive
ST15230WC trouble
daemon@ATHENA.MIT.EDU (Jon Lewis)
Sun Mar 8 21:38:54 1998
Date: Sun, 8 Mar 1998 21:32:09 -0500 (EST)
From: Jon Lewis <jlewis@inorganic5.fdt.net>
Reply-To: Jon Lewis <jlewis@inorganic5.fdt.net>
To: Linux SCSI Mailing List <linux-scsi@vger.rutgers.edu>
cc: ncr53c810@Colorado.EDU
I put an IDE disk in this new system just to get Linux installed so I could
mess with the ST15230WC and easily log what was going on. First time I used
modprobe to load the ncr8xx driver, the system hung after a few complaints.
Mar 9 10:03:10 io5 modprobe: Can't locate module block-major-8
Mar 9 10:03:28 io5 kernel: ncr53c8xx: at PCI bus 0, device 12, function 0
Mar 9 10:03:28 io5 kernel: ncr53c8xx: unit=0 chip=875 rev=0x4 base=0xe4000000, io_port=0xb800, irq=5
Mar 9 10:03:28 io5 kernel: ncr53c875-0: on-board RAM at 0xe3800000
Mar 9 10:03:28 io5 kernel: ncr53c875-0: Ultra SCSI support enabled
Mar 9 10:03:28 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:03:28 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:03:28 io5 kernel: scsi0 : ncr53c8xx - revision 1.18i
Mar 9 10:03:28 io5 kernel: scsi : 1 host.
Mar 9 10:03:30 io5 kernel: Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738
Mar 9 10:03:30 io5 kernel: Type: Direct-Access ANSI SCSI revision: 02
Mar 9 10:03:30 io5 kernel: Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Mar 9 10:04:02 io5 kernel: scsi : aborting command due to timeout : pid 16, scsi0, channel 0, id 0, lun 0 Read Capacity 00 00 00 00 00 00 00 00 00
Mar 9 10:04:02 io5 kernel: ncr53c8xx_abort: pid=16 serial_number=31 serial_number_at_timeout=31
Mar 9 10:04:17 io5 kernel: scsi : aborting command due to timeout : pid 16, scsi0, channel 0, id 0, lun 0 Read Capacity 00 00 00 00 00 00 00 00 00
Mar 9 10:04:17 io5 kernel: ncr53c8xx_abort: pid=16 serial_number=32 serial_number_at_timeout=32
Mar 9 10:04:17 io5 kernel: ncr53c875-0: abort ccb=00770020 (skip)
Mar 9 10:04:19 io5 kernel: SCSI host 0 abort (pid 16) timed out - resetting
Mar 9 10:04:19 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:04:19 io5 kernel: ncr53c8xx_reset: pid=16 reset_flags=2 serial_number=32 serial_number_at_timeout=32
Mar 9 10:04:19 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:04:19 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:10:02 io5 syslogd 1.3-3: restart.
I tried again just using insmod to load the driver, and it didn't hang, but
the result wasn't much better.
Mar 9 10:12:50 io5 kernel: ncr53c8xx: at PCI bus 0, device 12, function 0
Mar 9 10:12:50 io5 kernel: ncr53c8xx: unit=0 chip=875 rev=0x4 base=0xe4000000, io_port=0xb800, irq=5
Mar 9 10:12:50 io5 kernel: ncr53c875-0: on-board RAM at 0xe3800000
Mar 9 10:12:50 io5 kernel: ncr53c875-0: Ultra SCSI support enabled
Mar 9 10:12:50 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:12:50 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:12:50 io5 kernel: scsi0 : ncr53c8xx - revision 1.18i
Mar 9 10:12:50 io5 kernel: scsi : 1 host.
Mar 9 10:12:56 io5 kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
Mar 9 10:12:56 io5 kernel: ncr53c8xx_abort: pid=0 serial_number=1 serial_number_at_timeout=1
Mar 9 10:12:56 io5 kernel: ncr53c875-0: abort ccb=01120bc0 (skip)
Mar 9 10:12:58 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:12:58 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:12:58 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=1 serial_number_at_timeout=1
Mar 9 10:12:58 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:12:58 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:13:06 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:13:06 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:13:06 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=2 serial_number_at_timeout=2
Mar 9 10:13:06 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:13:06 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:13:14 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:13:14 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:13:14 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=3 serial_number_at_timeout=3
Mar 9 10:13:14 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:13:14 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:13:22 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:13:22 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:13:22 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=4 serial_number_at_timeout=4
Mar 9 10:13:22 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:13:22 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:13:29 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:13:29 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:13:29 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=5 serial_number_at_timeout=5
Mar 9 10:13:29 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:13:29 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:13:37 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:13:37 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:13:37 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=6 serial_number_at_timeout=6
Mar 9 10:13:37 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:13:37 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:13:45 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:13:45 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:13:45 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=7 serial_number_at_timeout=7
Mar 9 10:13:45 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:13:45 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:13:54 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:13:54 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:13:54 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=8 serial_number_at_timeout=8
Mar 9 10:13:54 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:13:54 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:14:02 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:14:02 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:14:02 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=9 serial_number_at_timeout=9
Mar 9 10:14:02 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:14:02 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:14:10 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:14:10 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:14:10 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=10 serial_number_at_timeout=10
Mar 9 10:14:10 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:14:10 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:14:18 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:14:18 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:14:18 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=11 serial_number_at_timeout=11
Mar 9 10:14:18 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:14:18 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:14:26 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:14:26 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:14:26 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=12 serial_number_at_timeout=12
Mar 9 10:14:26 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:14:26 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ....
Mar 9 10:14:34 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:14:34 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:14:34 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=13 serial_number_at_timeout=13
Mar 9 10:14:34 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:14:34 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:14:42 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:14:42 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:14:42 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=14 serial_number_at_timeout=14
Mar 9 10:14:42 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:14:42 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:14:49 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:14:49 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:14:49 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=15 serial_number_at_timeout=15
Mar 9 10:14:49 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:14:49 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:14:58 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:14:58 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:14:58 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=16 serial_number_at_timeout=16
Mar 9 10:14:58 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:14:58 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:15:06 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:15:06 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:15:06 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=17 serial_number_at_timeout=17
Mar 9 10:15:06 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:15:06 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:15:14 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:15:14 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:15:14 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=18 serial_number_at_timeout=18
Mar 9 10:15:14 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:15:14 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:15:21 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:15:21 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:15:21 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=19 serial_number_at_timeout=19
Mar 9 10:15:21 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:15:21 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:15:30 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:15:30 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:15:30 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=20 serial_number_at_timeout=20
Mar 9 10:15:30 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:15:30 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:15:37 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:15:37 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:15:37 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=21 serial_number_at_timeout=21
Mar 9 10:15:37 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:15:37 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:15:45 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:15:45 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:15:45 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=22 serial_number_at_timeout=22
Mar 9 10:15:45 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:15:45 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:15:54 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:15:54 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:15:54 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=23 serial_number_at_timeout=23
Mar 9 10:15:54 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:15:54 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:16:02 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:16:02 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:16:02 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=24 serial_number_at_timeout=24
Mar 9 10:16:02 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:16:02 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:16:09 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:16:09 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:16:09 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=25 serial_number_at_timeout=25
Mar 9 10:16:09 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:16:09 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:16:18 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:16:18 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:16:18 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=26 serial_number_at_timeout=26
Mar 9 10:16:18 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:16:18 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:16:26 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:16:26 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:16:26 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=27 serial_number_at_timeout=27
Mar 9 10:16:26 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:16:26 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:16:34 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:16:34 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:16:34 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=28 serial_number_at_timeout=28
Mar 9 10:16:34 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:16:34 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:16:42 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:16:42 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:16:42 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=29 serial_number_at_timeout=29
Mar 9 10:16:42 io5 kernel: ncr53c875-0: restart (scsi reset).
Mar 9 10:16:42 io5 kernel: ncr53c875-0: copying script fragments into the on-board RAM ...
Mar 9 10:16:50 io5 kernel: SCSI host 0 abort (pid 0) timed out - resetting
Mar 9 10:16:50 io5 kernel: SCSI bus is being reset for host 0 channel 0.
Mar 9 10:16:50 io5 kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=30 serial_number_at_timeout=30
This just repeats indefinitely. I'd hoped to run scsiinfo...but it looks
like things aren't working well enough to get that far. It's been suggested
that the drive could be bad...but as its brand new, that wasn't the first
thing that crossed my mind. I'm using a 50-pin SCSI ribbon cable between
the Diamond Fireport40 and the SCA-SCSI-II/SCSI-Wide adaptor.
I'll go ahead and compile 2.0.33 with a more recent ncr8xx
driver...probably going to have to wait till tomorrow though.
------------------------------------------------------------------
Jon Lewis <jlewis@fdt.net> | Unsolicited commercial e-mail will
Network Administrator | be proof-read for $199/message.
Florida Digital Turnpike |
______http://inorganic5.fdt.net/~jlewis/pgp for PGP public key____
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
