[3476] in linux-scsi channel archive
Re: BT-958UW, Seagate drive and HP DAT Autochanger
daemon@ATHENA.MIT.EDU (Gerald J. Puhl)
Sat Mar 7 12:58:34 1998
Date: Sat, 7 Mar 1998 11:44:59 -0600 (CST)
From: "Gerald J. Puhl" <garyp@jppattern.com>
To: linux-scsi@vger.rutgers.edu
In-Reply-To: <3500ACBE.7C15EB84@ibm.net>
Thanks to those of you who replied to my first posting!
However, I have not been able to get much further. I have the Seagate
disk on SCSI ID # 0 and the HP DAT on SCSI ID # 1. When I connect the
cable to the DAT drive (btw HP DAT is internal as well as the Seagate),
the scsi bios cannot find a disk to boot from. If the SCSI 2 cable to the
DAT is disconnected everything is fine. When in the SCSI BIOS settings a
scan of the SCSI bus shows nothing when the DAT is connected but when the
DAT is disconnected the scan picks up the Seagate drive. I must be either
missing something that is obvious or I have a deffective DAT. Does anyone
have some ideas ?
Thanx!
---------------------------------------------------------------------------
Gerald J. Puhl (garyp@jppattern.com)
Systems Manager
J. P. Pattern Inc.
for more information about JP Pattern please visit our Web site at:
www.jppattern.com or www.execpc.com/~jppat
---------------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
