[3221] in linux-scsi channel archive
PCMCIA SCSI cards.
daemon@ATHENA.MIT.EDU (Eugenio Jimenez Yguacel)
Thu Feb 5 21:07:22 1998
Date: Thu, 5 Feb 1998 20:35:37 +0000 (GMT)
From: Eugenio Jimenez Yguacel <eugenio@Cascorro.teleco.ulpgc.es>
To: linux-scsi@vger.rutgers.edu
Hi all,
Has anybody an APA-1460B running in his system?
Which devices do you have?
Two logs... :-(
A box with two hard drives:
kernel: Linux PCMCIA Card Services 3.0.0
kernel: Kernel build: 2.0.33 #7 Sat Jan 31 18:41:38 GMT 1998
kernel: Options: [cardbus] [apm]
kernel: Intel PCIC probe:
kernel: TI 1131 Cardbus at 0x3e0 ofs 0x00, mem 0x68000000, 2 sockets
kernel: host opts [0]: [isa irq] [no pci irq] [lat 32/176] [bus 32/34]
kernel: host opts [1]: [isa irq] [no pci irq] [lat 32/176] [bus 35/37]
kernel: ISA irqs (scanned) = 9,10,11 status change on irq 11
cardmgr[1123]: starting, version is 3.0.0
kernel: cs: IO port probe 0x0100-0x03ff: excluding 0x378-0x37f
cardmgr[1123]: watching 2 sockets
kernel: cs: IO port probe 0x0a00-0x0aff: clean.
cardmgr[1123]: initializing socket 1
kernel: cs: memory probe 0x0d0000-0x0dffff: clean.
cardmgr[1123]: socket 1: Adaptec APA-1460 SlimSCSI
cardmgr[1123]: executing: 'insmod /lib/modules/2.0.33/scsi/scsi_mod.o'
cardmgr[1123]: executing: 'insmod /lib/modules/2.0.33/scsi/sd_mod.o'
cardmgr[1123]: executing: 'insmod /lib/modules/2.0.33/pcmcia/aha152x_cs.o'
kernel: aha152x: processing commandline: ok
kernel: aha152x: BIOS test: passed, detected 1 controller(s)
kernel: aha152x0: vital data: PORTBASE=0x340, IRQ=9, SCSI ID=7,
reconnect=enabled, parity=enabled, synchronous=disabled, delay=100,
extended translation=disabled
kernel: aha152x: trying software interrupt, ok.
kernel: scsi0 : Adaptec 152x SCSI driver; $Revision: 1.18 $
kernel: scsi : 1 host.
kernel: Vendor: FUJITSU Model: M1606S-512 Rev: 6218
kernel: Type: Direct-Access ANSI SCSI revision: 02
kernel: Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
kernel: Vendor: CONNER Model: CFP1060S 1.05GB Rev: 203C
kernel: Type: Direct-Access ANSI SCSI revision: 02
kernel: Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
kernel: sda: Spinning up disk...........ready
kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 2131992 [1041 MB]
[1.0 GB]
kernel: sda: sda1
kernel: SCSI device sdb: hdwr sector= 512 bytes. Sectors= 2074880 [1013 MB]
[1.0 GB]
kernel: sdb: sdb1
kernel: aha152x_cs: RequestConfiguration: Operation succeeded
kernel: scsi : 0 hosts.
cardmgr[1123]: get dev info on socket 1 failed: No such device
An HP Scanner
kernel: Linux PCMCIA Card Services 3.0.0
kernel: Kernel build: 2.0.33 #7 Sat Jan 31 18:41:38 GMT 1998
kernel: Options: [cardbus] [apm]
kernel: Intel PCIC probe:
kernel: TI 1131 Cardbus at 0x3e0 ofs 0x00, mem 0x68000000, 2 sockets
kernel: host opts [0]: [isa irq] [no pci irq] [lat 32/176] [bus 32/34]
kernel: host opts [1]: [isa irq] [no pci irq] [lat 32/176] [bus 35/37]
kernel: ISA irqs (scanned) = 7,9,10,11 status change on irq 11
cardmgr[148]: starting, version is 3.0.0
cardmgr[148]: watching 2 sockets
kernel: cs: IO port probe 0x0100-0x03ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f
kernel: cs: IO port probe 0x0a00-0x0aff: clean.
kernel: cs: memory probe 0x0d0000-0x0dffff: clean.
cardmgr[148]: initializing socket 0
cardmgr[148]: socket 0: NE2000 Compatible Ethernet Card
cardmgr[148]: executing: 'insmod /lib/modules/2.0.33/net/8390.o'
kernel: loading device 'eth0'...
kernel: eth0: NE2000 Compatible: port 0x300, irq 9, hw_addr 00:00:B4:03:05:17
cardmgr[148]: executing: 'insmod /lib/modules/2.0.33/pcmcia/pcnet_cs.o'
cardmgr[148]: executing: './network start eth0'
cardmgr[148]: initializing socket 1
cardmgr[148]: socket 1: Adaptec APA-1460 SlimSCSI
cardmgr[148]: executing: 'insmod /lib/modules/2.0.33/scsi/scsi_mod.o'
cardmgr[148]: executing: 'insmod /lib/modules/2.0.33/scsi/sg.o'
cardmgr[148]: executing: 'insmod /lib/modules/2.0.33/pcmcia/aha152x_cs.o'
kernel: aha152x: processing commandline: ok
kernel: aha152x: BIOS test: passed, detected 1 controller(s)
kernel: aha152x0: vital data: PORTBASE=0x340, IRQ=10, SCSI ID=7,
reconnect=enabled, parity=enabled, synchronous=disabled, delay=100,
extended translation=disabled
kernel: aha152x: trying software interrupt, ok.
kernel: scsi0 : Adaptec 152x SCSI driver; $Revision: 1.18 $
kernel: scsi : 1 host.
kernel: Vendor: HP Model: C1790A Rev: 3206
kernel: Type: Processor ANSI SCSI revision: 02
kernel: aha152x_cs: RequestConfiguration: Operation succeeded
kernel: scsi : 0 hosts.
cardmgr[148]: get dev info on socket 1 failed: No such device
TIA
______________________________________________________________________
Eugenio Jimenez Yguacel eugenio@cascorro.teleco.ulpgc.es
E.T.S.I. Telecomunicacion Tfno: (+34)-28-452863
Campus de Tafira S/N Fax: (+34)-28-451243
35017 Las Palmas, Spain Beer, breakfast for champions!
----------------------------------------------------------------------
