[3163] in linux-scsi channel archive
2.1.[78]x SCSI bootmessage confusion
daemon@ATHENA.MIT.EDU (Michel Eyckmans (MCE))
Sun Feb 1 07:22:56 1998
To: linux-scsi@vger.rutgers.edu
Date: Sun, 01 Feb 1998 13:20:47 +0100
From: "Michel Eyckmans (MCE)" <mce@tornado.be>
Greetings,
Ever since 2.1.76, I'm seeing incorrect SCSI bootmesages.
Here's the 2.1.84 version:
: scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 4.1/3.2
: scsi1 : Adaptec 152x SCSI driver; $Revision: 1.7 $
: scsi : 2 hosts.
: scsi0: Target 0, channel A, now synchronous at 20.0MHz, offset 15.
: Vendor: SEAGATE Model: ST32155N Rev: 0318
: Type: Direct-Access ANSI SCSI revision: 02
: Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
: Vendor: IOMEGA Model: ZIP 100 Rev: N*32
: Type: Direct-Access ANSI SCSI revision: 02
: Detected scsi removable disk sda at scsi1, channel 0, id 5, lun 0
^^^^^
: scsi : detected 2 SCSI disks total.
: SCSI device sda: hdwr sector= 512 bytes. Sectors= 4197405 [2049 MB] [2.0 GB]
: SCSI device sda: hdwr sector= 512 bytes. Sectors= 196608 [96 MB] [0.1 GB]
^^^^
: sda: Write Protect is off
^^^^
: Partition check:
: sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
: sdb: sdb4
The underlined "sda"s obviously should read sdb.
Both hosts/disks seem to work fine. so it might just be
a cosmetic thing. But then again it might also indicative
of something worse.
MCE
--
========================================================================
M. Eyckmans (MCE) Code of the Geeks v3.1 mce@tornado.be
GCS d+ s+:- a32 C+++$ UHLUASO+++$ P+ L+++ E--- W++ N+++ !o K w--- !O M--
V-- PS+ PE+ Y+ PGP- t--- !5 !X R- tv- b+ DI++ D-- G++ e+++ h+(*) !r y?
========================================================================
