[2989] in linux-scsi channel archive
CD Writing problems
daemon@ATHENA.MIT.EDU (rstagg@csc.com)
Tue Dec 23 06:29:14 1997
From: rstagg@csc.com
To: linux-scsi@vger.rutgers.edu
Date: Tue, 23 Dec 1997 11:09:54 +0000
I'd appreciate any advice that you folks can give about tuning a system for
CD writing. I'm currently writing most of my discs successfully, but a too
significant number are failing.
My system: 2.0.32 kernel, Buslogic BT958, 2xQuantum Fireball ST, Matshita
CD-ROM and the Yamaha CDR-100.
Software: cdwrite 2.0
Problem: During writes, sometimes, the writing stops and I get hundreds of
errors along the lines of "SENSE_ERROR iter 771: pipe_to_cd result 0,
pack_id 27 sense ......" and then a pile of bytes. Followed by "18 of 18
pipe_to_cd reply bytes:" and another pile of bytes. Once this happens, the
disk has to be thrown away.
I've not spotted any event which makes this happen. I write with the
network interface turned off and all users slung off the machine. I can do,
for example, three test writes perfectly well, and the fourth will come up
with the above error. Sometimes it gets nearly to the end of the disk and
then fails. Sometimes it does it almost immediately.
Occasionally, this problem seems to upset the CDR, and I have to halt the
system and power cycle before it starts behaving again.
Any ideas or suggestions?
Richard Stagg
