[2824] in linux-scsi channel archive
2.0.32 and aic7xxx queue-full problems
daemon@ATHENA.MIT.EDU (Dave Wreski)
Tue Nov 18 04:08:00 1997
Date: Tue, 18 Nov 1997 04:06:09 -0500 (EST)
From: Dave Wreski <dave@nic.com>
To: linux-scsi <linux-scsi@vger.rutgers.edu>
Hi all. I'm receiving queue full/target busy messages with 2.0.32, and my
aha2940UW. It's coming from a new drive, so I suppose it could be
configuration related.
(scsi0:0:0) Queue full received; queue depth 8, active -250397
(scsi0:0:0) Target busy
[...]
Adaptec AIC7xxx driver version: 4.1/3.2
Compile Options:
AIC7XXX_RESET_DELAY : 15
AIC7XXX_TAGGED_QUEUEING: Enabled
AIC7XXX_PAGE_ENABLE : Enabled
AIC7XXX_PROC_STATS : Disabled
Adapter Configuration:
SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
(AIC-788x chipset)
Host Bus: Wide
Base IO: 0x9000
Base IO Memory: 0xe0804000
IRQ: 9
SCBs: Used 17, HW 16, Page 255
Interrupts: 306349
Serial EEPROM: True
Extended Translation: Disabled
SCSI Bus Reset: Enabled
Ultra SCSI: Enabled
Disconnect Enable Flags: 0xffff
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: QUANTUM Model: XP32275W Rev: LXY4
Type: Direct-Access ANSI SCSI revision: 02
This is a new drive, possibly I have something configured incorrectly?
Thanks,
Dave
