[235] in linux-scsi channel archive
Re: multiple NCR53C810 cards?
daemon@ATHENA.MIT.EDU (Richard Gooch)
Wed Jun 7 05:01:27 1995
Date: Wed, 7 Jun 1995 18:02:45 +1000
From: Richard Gooch <rgooch@atnf.CSIRO.AU>
To: linux-scsi@vger.rutgers.edu
Cc: Michael Schwingen <m.schwingen@stochastik.rwth-aachen.de>
In-Reply-To: <9506061354.AA22361@jupiter.stochastik.rwth-aachen.de>
Michael Schwingen writes:
> Greetings,
>
> Today I tried plugging in a second NCR SCSI controller card (Intel Plato P90
> board). DOS boots up and the driver initializes both cards fine.
Have you enabled the NCR SCSI BIOS? Before booting the OS (DOG or
Linux), you should get a message about the SCSI BIOS and then the SCSI
devices found.
> Another strange thing is that during initialization of the second NCR, Linux
> tells me that it's using initiator ID 0 instead of 7 (on the first one).
>
> Is a dual-NCR setup supposed to work, or is there still work to be done in the
> driver?
I have initiator ID=0 once when I didn't enable the NCR SCSI BIOS.
That was with a single NCR card in the system.
Regards,
Richard....
