[2307] in linux-scsi channel archive
Crash with pre 2.0.31-7, Buslogic
daemon@ATHENA.MIT.EDU (Dietmar Braun)
Mon Aug 18 16:27:16 1997
Date: Mon, 18 Aug 1997 21:42:19 +0200
From: Dietmar Braun <dietmar@highway.bertelsmann.de>
To: linux-scsi@vger.rutgers.edu
Hi,
i had a reproducible crash with pre2.0.31-7 today.
I have burned a CD on an old cd-writer,
which causes problems on my cd-rom.
Read acesses time out and when trying a bus reset,
the kernel panics.
There is no crash with 2.0.29.
I append both syslogs.
The problem is with only this _one_ CD in this _one_ machine :-)
Seems to get only trigerred with read problems.
Ciao
Dietmar
--
Reporter (to Mahatma Gandhi): Mr Gandhi, what do you think of Western
Civilization? Gandhi: I think it would be a good idea.
Dietmar Braun, E-Mail: braun@highway.bertelsmann.de;
pre 2.0.31-7:
Aug 18 07:58:46 saab kernel: Loaded 4114 symbols from /System.map.
[...]
Aug 18 07:58:46 saab kernel: Symbols match kernel version 2.0.31.
Aug 18 07:58:46 saab kernel: linear personality registered
Aug 18 07:58:46 saab kernel: raid0 personality registered
Aug 18 07:58:46 saab kernel: scsi: ***** BusLogic SCSI Driver Version 2.0.10 of 11 August 1997 *****
Aug 18 07:58:46 saab kernel: scsi: Copyright 1995 by Leonard N. Zubkoff <lnz@dandelion.com>
Aug 18 07:58:46 saab kernel: scsi0: Configuring BusLogic Model BT-946C PCI SCSI Host Adapter
Aug 18 07:58:46 saab kernel: scsi0: Firmware Version: 4.28D, I/O Address: 0xEFF4, IRQ Channel: 10/Level
Aug 18 07:58:46 saab kernel: scsi0: PCI Bus: 0, Device: 15, Address: Unassigned, Host Adapter SCSI ID: 7
Aug 18 07:58:46 saab kernel: scsi0: Parity Checking: Enabled, Extended Translation: Disabled
Aug 18 07:58:46 saab kernel: scsi0: Synchronous Negotiation: Fast, Wide Negotiation: Disabled
Aug 18 07:58:46 saab kernel: scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
Aug 18 07:58:46 saab kernel: scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 255
Aug 18 07:58:46 saab kernel: scsi0: Driver Queue Depth: 255, Host Adapter Queue Depth: 100
Aug 18 07:58:46 saab kernel: scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
Aug 18 07:58:46 saab kernel: scsi0: Error Recovery Strategy: Default, SCSI Bus Reset: Enabled
Aug 18 07:58:46 saab kernel: scsi0: SCSI Bus Termination: Disabled
Aug 18 07:58:46 saab kernel: scsi0: *** BusLogic BT-946C Initialized Successfully ***
Aug 18 07:58:46 saab kernel: scsi0: Target 1: Asynchronous
Aug 18 07:58:46 saab kernel: scsi0: Target 3: Synchronous at 10.0 mega-transfers/second, offset 15
Aug 18 07:58:46 saab kernel: scsi0: Target 4: Synchronous at 6.67 mega-transfers/second, offset 15
Aug 18 07:58:46 saab kernel: scsi0: Target 5: Asynchronous
Aug 18 07:58:46 saab kernel: scsi0 : BusLogic BT-946C
Aug 18 07:58:46 saab kernel: scsi : 1 host.
Aug 18 07:58:46 saab kernel: Vendor: SANYO Model: CRD-254S Rev: 1.04
Aug 18 07:58:46 saab kernel: Type: CD-ROM ANSI SCSI revision: 02
Aug 18 07:58:46 saab kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
Aug 18 07:58:46 saab kernel: Vendor: IBM Model: DCAS-34330 Rev: S61A
Aug 18 07:58:46 saab kernel: Type: Direct-Access ANSI SCSI revision: 02
Aug 18 07:58:46 saab kernel: Detected scsi disk sda at scsi0, channel 0, id 3, lun 0
Aug 18 07:58:46 saab kernel: Vendor: ARCHIVE Model: Python 28388-XXX Rev: 5.72
Aug 18 07:58:46 saab kernel: Type: Sequential-Access ANSI SCSI revision: 02
Aug 18 07:58:46 saab kernel: Detected scsi tape st0 at scsi0, channel 0, id 4, lun 0
Aug 18 07:58:46 saab kernel: Vendor: HP Model: C2500A Rev: 3332
Aug 18 07:58:46 saab kernel: Type: Processor ANSI SCSI revision: 02
Aug 18 07:58:46 saab kernel: Detected scsi generic sgd at scsi0, channel 0, id 5, lun 0
Aug 18 07:58:46 saab kernel: scsi : detected 1 SCSI tape 1 SCSI cdrom 1 SCSI disk total.
Aug 18 07:58:46 saab kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 8467200 [4134 MB] [4.1 GB]
Aug 18 07:58:46 saab kernel: eth0: DC21140 at 0xfc80 (PCI bus 0, device 16), h/w address 00:00:c0:7e:f7:f3,
Aug 18 07:58:46 saab kernel: and requires IRQ9 (provided by PCI BIOS).
Aug 18 07:58:46 saab kernel: Partition check:
Aug 18 07:58:46 saab kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Aug 18 07:58:46 saab kernel: VFS: Mounted root (ext2 filesystem) readonly.
Aug 18 07:58:46 saab kernel: scsi0: Tagged Queuing now active for Target 3
Aug 18 07:58:46 saab kernel: Adding Swap: 130028k swap-space (priority -1)
Aug 18 07:58:47 saab kerneld: started, pid=101, qid=0
Aug 18 11:34:22 saab kernel: CDROM not ready. Make sure there is a disc in the drive.
Aug 18 11:34:22 saab kernel: Device not ready. Make sure there is a disc in the drive.
Aug 18 11:34:22 saab kernel: VFS: Disk change detected on device 0b:00
Aug 18 11:34:22 saab kernel: Device not ready. Make sure there is a disc in the drive.
Aug 18 11:34:22 saab kernel: CD-ROM I/O error: dev 0b:00, sector 0
Aug 18 11:34:22 saab kernel: Device not ready. Make sure there is a disc in the drive.
Aug 18 11:34:22 saab kernel: CDROM not ready. Make sure there is a disc in the drive.
Aug 18 11:34:22 saab kernel: Device not ready. Make sure there is a disc in the drive.
Aug 18 11:34:22 saab kernel: VFS: Disk change detected on device 0b:00
Aug 18 11:34:22 saab kernel: Device not ready. Make sure there is a disc in the drive.
Aug 18 11:34:22 saab kernel: CD-ROM I/O error: dev 0b:00, sector 0
Aug 18 11:34:22 saab kernel: Device not ready. Make sure there is a disc in the drive.
Aug 18 11:34:22 saab kernel: CDROM not ready. Make sure there is a disc in the drive.
Aug 18 11:34:22 saab kernel: Device not ready. Make sure there is a disc in the drive.
Aug 18 11:34:22 saab kernel: VFS: Disk change detected on device 0b:00
Aug 18 11:34:22 saab kernel: Device not ready. Make sure there is a disc in the drive.
Aug 18 11:34:22 saab kernel: Device not ready. Make sure there is a disc in the drive.
Aug 18 11:34:22 saab kernel: VFS: Disk change detected on device 0b:00
Aug 18 11:34:22 saab kernel: CD-ROM I/O error: dev 0b:00, sector 0
Aug 18 11:34:22 saab kernel: FAT bread failed
Aug 18 11:34:22 saab kernel: Device not ready. Make sure there is a disc in the drive.
Aug 18 11:34:28 saab kernel: Disc change detected.
Aug 18 11:34:28 saab kernel: VFS: Disk change detected on device 0b:00
Aug 18 11:34:28 saab kernel: Max size:325939 Log zone size:2048
Aug 18 11:34:28 saab kernel: First datazone:24 Root inode number 49152
Aug 18 11:34:28 saab kernel: ISO9660 Extensions: RRIP_1991A
Aug 18 11:38:17 saab kernel: scsi : aborting command due to timeout : pid 11951, scsi0, channel 0, id 1, lun 0 Read (6) 00 00 9b 01 00
Aug 18 11:38:17 saab kernel: scsi0: Aborting CCB #11955 to Target 1
Aug 18 11:38:18 saab kernel: scsi0: CCB #11955 to Target 1 Aborted
Aug 18 11:39:01 saab kernel: scsi : aborting command due to timeout : pid 11995, scsi0, channel 0, id 1, lun 0 Read (6) 00 00 9c 01 00
Aug 18 11:39:01 saab kernel: scsi0: Aborting CCB #12000 to Target 1
Aug 18 11:39:01 saab kernel: scsi0: CCB #12000 to Target 1 Aborted
Aug 18 11:40:11 saab kernel: scsi : aborting command due to timeout : pid 12080, scsi0, channel 0, id 1, lun 0 Read (6) 00 00 7b 01 00
Aug 18 11:40:11 saab kernel: scsi0: Aborting CCB #12086 to Target 1
Aug 18 11:40:12 saab kernel: scsi0: CCB #12086 to Target 1 Aborted
Aug 18 11:40:16 saab kernel: scsi : aborting command due to timeout : pid 12082, scsi0, channel 0, id 1, lun 0 Read (6) 00 ae 47 1a 00
Aug 18 11:40:16 saab kernel: scsi0: Aborting CCB #12088 to Target 1
Aug 18 11:40:16 saab kernel: scsi0: CCB #12088 to Target 1 Aborted
Aug 18 11:40:42 saab kernel: scsi : aborting command due to timeout : pid 12080, scsi0, channel 0, id 1, lun 0 Read (6) 00 00 7b 01 00
Aug 18 11:40:42 saab kernel: scsi0: Aborting CCB #12220 to Target 1
Aug 18 11:40:42 saab kernel: scsi0: CCB #12220 to Target 1 Aborted
Aug 18 11:40:42 saab kernel: scsi0 channel 0 : resetting for second half of retries.
Aug 18 11:40:42 saab kernel: SCSI bus is being reset for host 0 channel 0.
Aug 18 11:40:42 saab kernel: scsi0: Sending Bus Device Reset CCB #12249 to Target 1
Aug 18 11:40:46 saab kernel: scsi0: Bus Device Reset CCB #12249 to Target 1 Completed
Aug 18 11:40:46 saab kernel: Kernel panic: No device passed to allocate_device().
I had to hit reset!
2.0.29
Aug 18 16:04:24 saab kernel: scsi: ***** BusLogic SCSI Driver Version 2.0.6 of 1 December 1996 *****
Aug 18 16:04:24 saab kernel: scsi: Copyright 1995 by Leonard N. Zubkoff <lnz@dandelion.com>
Aug 18 16:04:24 saab kernel: scsi0: Configuring BusLogic Model BT-946C PCI SCSI Host Adapter
Aug 18 16:04:24 saab kernel: scsi0: Firmware Version: 4.28D, I/O Address: 0xEFF4, IRQ Channel: 10/Level
Aug 18 16:04:24 saab kernel: scsi0: DMA Channel: None, BIOS Address: 0xDC000, Host Adapter SCSI ID: 7
Aug 18 16:04:24 saab kernel: scsi0: Scatter/Gather Limit: 128 of 8192 segments, Parity Checking: Enabled
Aug 18 16:04:24 saab kernel: scsi0: Synchronous Initiation: Enabled, Extended Disk Translation: Disabled
Aug 18 16:04:24 saab kernel: scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
Aug 18 16:04:24 saab kernel: scsi0: Total Queue Depth: 100, Mailboxes: 255, Initial CCBs: 64
Aug 18 16:04:24 saab kernel: scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
Aug 18 16:04:24 saab kernel: scsi0: Host Adapter SCSI Bus Termination: Disabled
Aug 18 16:04:24 saab kernel: scsi0: Error Recovery Strategy: Default
Aug 18 16:04:24 saab kernel: scsi0: *** BusLogic BT-946C Initialized Successfully ***
Aug 18 16:04:24 saab kernel: scsi0: Target 1: Asynchronous
Aug 18 16:04:24 saab kernel: scsi0: Target 3: Synchronous at 10.0 mega-transfers/second, offset 15
Aug 18 16:04:24 saab kernel: scsi0: Target 4: Synchronous at 6.67 mega-transfers/second, offset 15
Aug 18 16:04:24 saab kernel: scsi0: Target 5: Asynchronous
Aug 18 16:04:24 saab kernel: scsi0 : BusLogic BT-946C
Aug 18 16:04:24 saab kernel: scsi : 1 host.
Aug 18 16:04:24 saab kernel: Vendor: SANYO Model: CRD-254S Rev: 1.04
Aug 18 16:04:24 saab kernel: Type: CD-ROM ANSI SCSI revision: 02
Aug 18 16:04:24 saab kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
Aug 18 16:04:24 saab kernel: Vendor: IBM Model: DCAS-34330 Rev: S61A
Aug 18 16:04:24 saab kernel: Type: Direct-Access ANSI SCSI revision: 02
Aug 18 16:04:24 saab kernel: Detected scsi disk sda at scsi0, channel 0, id 3, lun 0
Aug 18 16:04:24 saab kernel: Vendor: ARCHIVE Model: Python 28388-XXX Rev: 5.72
Aug 18 16:04:24 saab kernel: Type: Sequential-Access ANSI SCSI revision: 02
Aug 18 16:04:24 saab kernel: Detected scsi tape st0 at scsi0, channel 0, id 4, lun 0
Aug 18 16:04:24 saab kernel: Vendor: HP Model: C2500A Rev: 3332
Aug 18 16:04:24 saab kernel: Type: Processor ANSI SCSI revision: 02
Aug 18 16:04:24 saab kernel: Detected scsi generic sgd at scsi0, channel 0, id 5, lun 0
Aug 18 16:04:24 saab kernel: scsi : detected 1 SCSI tape 1 SCSI cdrom 1 SCSI disk total.
Aug 18 16:04:24 saab kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 8467200 [4134 MB] [4.1 GB]
Aug 18 16:04:24 saab kernel: eth0: DC21140 at 0xfc80 (PCI bus 0, device 16), h/w address 00:00:c0:7e:f7:f3,
Aug 18 16:04:24 saab kernel: and requires IRQ9 (provided by PCI BIOS).
Aug 18 16:04:24 saab kernel: Partition check:
Aug 18 16:04:24 saab kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Aug 18 16:04:24 saab kernel: VFS: Mounted root (ext2 filesystem) readonly.
Aug 18 16:04:24 saab kernel: scsi0: Tagged Queuing now active for Target 3
Aug 18 16:04:24 saab kernel: Adding Swap: 130028k swap-space
Aug 18 16:07:51 saab kernel: Disc change detected.
Aug 18 16:07:51 saab kernel: VFS: Disk change detected on device 0b:00
Aug 18 16:07:51 saab kernel: Max size:325939 Log zone size:2048
Aug 18 16:07:51 saab kernel: First datazone:24 Root inode number 49152
Aug 18 16:08:21 saab kernel: scsi : aborting command due to timeout : pid 4160, scsi0, channel 0, id 1, lun 0 Read (6) 00 02 ad 01 00
Aug 18 16:08:21 saab kernel: scsi0: Aborting CCB #4164 to Target 1
Aug 18 16:08:21 saab kernel: scsi0: CCB #4164 to Target 1 Aborted
Aug 18 16:08:51 saab kernel: scsi : aborting command due to timeout : pid 4160, scsi0, channel 0, id 1, lun 0 Read (6) 00 02 ad 01 00
Aug 18 16:08:51 saab kernel: scsi0: Aborting CCB #4169 to Target 1
Aug 18 16:08:51 saab kernel: scsi0: CCB #4169 to Target 1 Aborted
Aug 18 16:08:51 saab kernel: scsi0 channel 0 : resetting for second half of retries.
Aug 18 16:08:51 saab kernel: SCSI bus is being reset for host 0 channel 0.
Aug 18 16:08:51 saab kernel: scsi0: Sending Bus Device Reset CCB #4170 to Target 1
Aug 18 16:08:53 saab kernel: scsi0: Bus Device Reset CCB #4170 to Target 1 Completed
Aug 18 16:09:28 saab kernel: SCSI host 0 channel 0 reset (pid 4160) timed out - trying harder
Aug 18 16:09:28 saab kernel: SCSI bus is being reset for host 0 channel 0.
Aug 18 16:09:28 saab kernel: scsi0: Resetting BusLogic BT-946C due to Target 1
Aug 18 16:09:28 saab kernel: scsi0: *** BusLogic BT-946C Initialized Successfully ***
Aug 18 16:09:29 saab kernel: CD-ROM I/O error: dev 0b:00, sector 2740
Aug 18 16:09:31 saab kernel: Unable to read rock-ridge attributes
Aug 18 16:09:31 saab kernel: VFS: Disk change detected on device 0b:00
Aug 18 16:09:31 saab kernel: VFS: inode busy on removed device 0b:00
Aug 18 16:09:31 saab kernel: VFS: brelse: Trying to free free buffer
Aug 18 16:10:33 saab kernel: scsi0: Tagged Queuing now active for Target 3
Aug 18 16:10:46 saab kernel: scsi : aborting command due to timeout : pid 4228, scsi0, channel 0, id 1, lun 0 Read (6) 00 00 00 01 00
Aug 18 16:10:46 saab kernel: scsi0: Aborting CCB #4238 to Target 1
Aug 18 16:10:47 saab kernel: SCSI host 0 abort (pid 4228) timed out - resetting
Aug 18 16:10:47 saab kernel: SCSI bus is being reset for host 0 channel 0.
Aug 18 16:10:47 saab kernel: scsi0: Sending Bus Device Reset CCB #4251 to Target 1
Aug 18 16:10:48 saab kernel: SCSI host 0 channel 0 reset (pid 4228) timed out - trying harder
Aug 18 16:10:48 saab kernel: SCSI bus is being reset for host 0 channel 0.
Aug 18 16:10:48 saab kernel: scsi0: Resetting BusLogic BT-946C due to Target 1
Aug 18 16:10:48 saab kernel: scsi0: *** BusLogic BT-946C Initialized Successfully ***
Aug 18 16:11:28 saab kernel: SCSI host 0 abort (pid 4228) timed out - resetting
Aug 18 16:11:28 saab kernel: SCSI bus is being reset for host 0 channel 0.
Aug 18 16:11:28 saab kernel: scsi0: Resetting BusLogic BT-946C due to Target 1
Aug 18 16:11:28 saab kernel: scsi0: *** BusLogic BT-946C Initialized Successfully ***
Aug 18 16:11:57 saab kernel: SCSI host 0 abort (pid 4228) timed out - resetting
Aug 18 16:11:57 saab kernel: SCSI bus is being reset for host 0 channel 0.
Aug 18 16:11:57 saab kernel: scsi0: Resetting BusLogic BT-946C due to Target 1
Aug 18 16:11:57 saab kernel: scsi0: *** BusLogic BT-946C Initialized Successfully ***
Aug 18 16:12:02 saab kernel: CD-ROM I/O error: dev 0b:00, sector 0
Aug 18 16:12:40 saab kernel: Kernel logging (proc) stopped.
Aug 18 16:12:40 saab kernel: Kernel log daemon terminating.
No crash, but i run /sbin/reboot to go bleeding edge again :-))
