[2294] in linux-scsi channel archive
Hint needed
daemon@ATHENA.MIT.EDU (roose j.)
Fri Aug 15 03:26:41 1997
From: roose@nlr.nl (roose j.)
To: linux-scsi@vger.rutgers.edu
Date: Fri, 15 Aug 1997 09:23:43 +0200 (CDT)
Cc: ncr53c810@cs.colorado.edu
Hi there,
I bought a computer with a SCSI Thosiba CD-ROM 570167, Yamaha CD-Recorder
CDR200t and a Symbios Logic NCR53c810 controller.
Already burned some CD's under windows95 and under DOS 2 CD-ROM drives are
detected.
Now I installed Linuz Redhat 4.2, but Linux does not detect the Yamaha !
When booting the SDMS bios detects the yamaha (ID 0) and the Thosiba (ID 6)
the controller (ID 7).
When Linux is booting I get the following message :
scsi : 0 hosts.
scsi : detected total.
Partition check:
hda: hda1 hda2 hda3 < hda5 > hda4
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ncr53c8xx : at PCI bus 0, device 10, function 0
ncr_attach: unit=0 chip=810 base=e6800000, io_port=d400, irq=10
ncr53c810-0: using memory mapped IO at virtual address 0x280f000
ncr53c810-0: initial value of SCNTL3 = 33, final = 13
ncr53c810-0: requesting shared irq 10 (dev_id=0x1e34068)
ncr53c810-0: restart (scsi reset).
scsi0 : ncr53c8xx (rel 1.12d)
scsi : 1 host.
Vendor: TOSHIBA Model: CD-ROM XM-5701TA Rev: 0167
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Note the detected ID is 0 while the bios detects the thosiba on ID 6 !
Does anybody know whats going wrong ?
P}lease help me out !
Thanks,
Jeroen <roose@nlr.nl>
