[2201] in linux-scsi channel archive
Oops in 2.0.30
daemon@ATHENA.MIT.EDU (SL Baur)
Thu Jul 24 18:07:51 1997
To: linux-scsi@vger.rutgers.edu
From: SL Baur <steve@xemacs.org>
Date: 24 Jul 1997 15:08:04 -0700
This is with 2.0.30 vanilla except for 3c59x.c v0.28c-all for a
Boomerang ethernet card. Pentium 200, 64MB ram.
The system had been up about 22 hours when my swap partition (on
/dev/sda1) froze. This was my first oops with 2.0.30, and I have run
with this card about a month.
$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST32171W Rev: 0484
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: SyQuest Model: SyJet-S Rev: 0092
Type: Direct-Access ANSI SCSI revision: 02
$ cat /proc/scsi/BusLogic/0
***** BusLogic SCSI Driver Version 2.0.9 of 29 March 1997 *****
Copyright 1995 by Leonard N. Zubkoff <lnz@dandelion.com>
Configuring BusLogic Model BT-950 PCI Wide Ultra SCSI Host Adapter
Firmware Version: 5.01, I/O Address: 0x6200, IRQ Channel: 9/Level
PCI Bus: 0, Device: 10, Address: 0xE4000000, Host Adapter SCSI ID: 7
Parity Checking: Enabled, Extended Translation: Enabled
Synchronous Negotiation: Fast, Wide Negotiation: Enabled
Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
Driver Queue Depth: 255, Scatter/Gather Limit: 128 segments
Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
Error Recovery Strategy: Default, SCSI Bus Reset: Enabled
SCSI Bus Termination: High Enabled, SCAM: Disabled
*** BusLogic BT-950 Initialized Successfully ***
Jul 24 14:08:45 altair kernel: general protection: 0000
Jul 24 14:08:46 altair kernel: CPU: 0
Jul 24 14:08:46 altair kernel: EIP: 0010:[BusLogic_QueueCommand+508/1680]
Jul 24 14:08:46 altair kernel: EFLAGS: 00010046
Jul 24 14:08:46 altair kernel: eax: 00314028 ebx: 00084018 ecx: 00000000 edx: 00000000
Jul 24 14:08:46 altair kernel: esi: 4016603a edi: 00001000 ebp: 00000008 esp: 00eebd14
Jul 24 14:08:46 altair kernel: ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018
Jul 24 14:08:46 altair kernel: Process sendmail (pid: 7793, process nr: 63, stackpage=00eeb000)
Jul 24 14:08:46 altair kernel: Stack: 0000f018 00000046 00008136 0001a018 39313c09 37303739 00000246 02df1bf8
Jul 24 14:08:46 altair kernel: 00000002 0200f018 00001000 00000000 02df1c0c 09093e6d 001d7f00 0123a414
Jul 24 14:08:46 altair kernel: 0123a414 00000000 00000000 00000000 00000006 0001a038 4016603a 0000f068
Jul 24 14:08:46 altair kernel: Call Trace: [scsi_do_cmd+865/940] [scsi_done+0/1672] [getblk+36/936] [requeue_sd_request+3458/3472] [rw_intr+0/1212] [make_request+1007/1020] [ll_rw_block+349/468]
Jul 24 14:08:46 altair kernel: [brw_page+638/860] [allocate_device+710/800] [FPT_autoCmdCmplt+208/1324] [do_sd_request+358/376] [unplug_device+37/44] [__wait_on_page+92/176] [rw_swap_page+414/736] [swap_in+115/236]
Jul 24 14:08:46 altair kernel: [do_no_page+620/808] [do_no_page+0/808] [do_page_fault+284/716] [do_page_fault+0/716] [error_code+64/80]
Jul 24 14:08:46 altair kernel: Code: ff 44 0e 08 8d 6c 0e 10 8b 7c 24 28 03 7d 00 89 7c 24 30 89
Jul 24 14:09:00 altair kernel: scsi : aborting command due to timeout : pid 33064, scsi0, channel 0, id 0, lun 0 Read (6) 00 1e 37 08 00
Jul 24 14:09:00 altair kernel: scsi0: Unable to Abort Command to Target 0 - No CCB Found
