[2115] in linux-scsi channel archive
Re: Tagged Queueing Problem w/ Buslogic and Quantum
daemon@ATHENA.MIT.EDU (Leonard N. Zubkoff)
Sun Jul 6 22:46:45 1997
Date: Sun, 6 Jul 1997 19:44:26 -0700
From: "Leonard N. Zubkoff" <lnz@dandelion.com>
To: john@verdi.cviog.uga.edu
CC: linux-scsi@vger.rutgers.edu
In-reply-to: <199707070203.WAA30599@verdi.cviog.uga.edu> (message from John
Taylor on Sun, 6 Jul 1997 22:03:17 -0400 (EDT))
From: John Taylor <john@verdi.cviog.uga.edu>
Date: Sun, 6 Jul 1997 22:03:17 -0400 (EDT)
scsi0: Configuring BusLogic Model BT-948 PCI Ultra SCSI Host Adapter
scsi0: Firmware Version: 5.06J, I/O Address: 0xD800, IRQ Channel: 11/Level
scsi0: Target 0: Synchronous at 20.0 mega-transfers/second, offset 15
Vendor: QUANTUM Model: FIREBALL_TM2110S Rev: 300X
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4124736 [2014 MB] [2.0 GB]
PROBLEM:
Tagged Queuing does not work with this adapter/drive combination. I tried
the factory standards, womper88 and womper89 firmwares, all with no luck.
The problem here is that the Quantum Fireball TM firmware 300X is buggy. You
need to contact Quantum to get firmware 301B or later.
Leonard
