[1913] in linux-scsi channel archive
AHA2940UW and Tapedrive...
daemon@ATHENA.MIT.EDU (Ringo De Smet)
Wed May 28 04:40:58 1997
Date: Wed, 28 May 1997 10:37:05 +0200
From: Ringo De Smet <Ringo.DeSmet@advalvas.be>
To: "LIST: Linux-SCSI" <linux-scsi@vger.rutgers.edu>,
"LIST: Linux-Tape" <linux-tape@vger.rutgers.edu>
This is a multi-part message in MIME format.
--------------3FB6364D4AB6BF863320E177
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hello,
I have a problem which relates to both SCSI and my tape drive so I sent
this message to both linux-scsi and linux-tape mailing list.
First of all my configuration:
Pentium 120
32MB RAM
id
Adaptec 2940UW 7
Seagate ST31200N 1.0GB HD synch 10MHz 0
NEC D3827 1.0GB HD synch 10MHz 1
Toshiba XM3401TA CD-ROM synch 4MHz 2
Syquest SQ3270S 270MB removable synch 5MHz 3
Conner CTMS3200 4GB (2GB native) synch 5MHz 6
and kernel 2.0.27 and 2.0.30
The speeds is what I got from the kernel-messages.
I added the tape-drive when I was running kernel 2.0.27. I started
making backups, first with TAR, then with Taper. About 2 weeks this went
flawlessly, then I started to get errors in mid-backup. (Error file as
attachment)
I upgraded my kernel to 2.0.30, but this was no help.
Scanning the newsgroups I read that the 2940 cards from Adaptec are not
that stable under Linux. Is this my problem? Why did it work for the
first 2 weeks then?
The tapes I use are QIC-Wide 3080 (Sony QW3080XLF). They were new when I
bought them and have been used about 10 times each now for making
backups.
Never had any problems with the disks, CD-ROM and Syquest.
Greetings,
Ringo
--------------------------------------------------------------------
Ringo De Smet mailto:Ringo.DeSmet@advalvas.be
Studentenvertegenwoordiger Dep. Informatica - Fac. Wetenschappen VUB
http://www.advalvas.be/white/scripts/white010.pl/D&35&2118
--------------------------------------------------------------------
--------------3FB6364D4AB6BF863320E177
Content-Type: text/plain; charset=us-ascii; name="timeout"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="timeout"
May 8 14:54:47 sch391 kernel: Detected scsi tape st0 at scsi0, channel 0, id 6, lun 0
May 8 15:24:38 sch391 kernel: scsi : aborting command due to timeout : pid 74101, scsi0, channel 0, id 1, lun 0 Write (6) 1f 92 e8 08 00
May 8 15:24:39 sch391 kernel: aic7xxx: (abort) Aborting scb 1, TCL 1/0/0
May 8 15:24:39 sch391 kernel: scsi : aborting command due to timeout : pid 74100, scsi0, channel 0, id 0, lun 0 Read (6) 1b 20 34 08 00
May 8 15:24:39 sch391 kernel: aic7xxx: (abort) Aborting scb 0, TCL 0/0/0
May 8 15:24:39 sch391 kernel: scsi : aborting command due to timeout : pid 74102, scsi0, channel 0, id 1, lun 0 Write (6) 1f 92 f0 10 00
May 8 15:24:39 sch391 kernel: aic7xxx: (abort) Aborting scb 2, TCL 1/0/0
May 8 15:24:39 sch391 kernel: scsi : aborting command due to timeout : pid 74103, scsi0, channel 0, id 0, lun 0 Write (6) 1a 88 0c 02 00
May 8 15:24:39 sch391 kernel: aic7xxx: (abort) Aborting scb 3, TCL 0/0/0
May 8 15:24:39 sch391 kernel: scsi : aborting command due to timeout : pid 74101, scsi0, channel 0, id 1, lun 0 Write (6) 1f 92 e8 08 00
May 8 15:24:39 sch391 kernel: aic7xxx: (abort) Aborting scb 1, TCL 1/0/0
May 8 15:24:39 sch391 kernel: SCSI host 0 abort (pid 74101) timed out - resetting
May 8 15:24:39 sch391 kernel: SCSI bus is being reset for host 0 channel 0.
May 8 15:24:39 sch391 kernel: aic7xxx: (reset) target/channel 1/0
May 8 15:24:39 sch391 kernel: aic7xxx: (abort_reset) scb state 0x1, Message-In phase, SCSISIGI = 0x4
May 8 15:24:39 sch391 kernel: aic7xxx: (abort_scb) asserted ATN - bus device reset in message buffer.
May 8 15:24:39 sch391 kernel: scsi : aborting command due to timeout : pid 74100, scsi0, channel 0, id 0, lun 0 Read (6) 1b 20 34 08 00
May 8 15:24:39 sch391 kernel: aic7xxx: (abort) Aborting scb 0, TCL 0/0/0
May 8 15:24:39 sch391 kernel: SCSI host 0 abort (pid 74100) timed out - resetting
May 8 15:24:39 sch391 kernel: SCSI bus is being reset for host 0 channel 0.
May 8 15:24:39 sch391 kernel: aic7xxx: (reset) target/channel 0/0
May 8 15:24:39 sch391 kernel: aic7xxx: (abort_reset) scb state 0x1, Message-In phase, SCSISIGI = 0x14
May 8 15:24:39 sch391 kernel: aic7xxx: (abort_scb) scb 0 is disconnected; bus device reset message queued.
May 8 15:24:39 sch391 kernel: scsi : aborting command due to timeout : pid 74102, scsi0, channel 0, id 1, lun 0 Write (6) 1f 92 f0 10 00
May 8 15:24:39 sch391 kernel: aic7xxx: (abort) Aborting scb 2, TCL 1/0/0
May 8 15:24:39 sch391 kernel: SCSI host 0 abort (pid 74102) timed out - resetting
May 8 15:24:39 sch391 kernel: SCSI bus is being reset for host 0 channel 0.
May 8 15:24:39 sch391 kernel: aic7xxx: (reset) target/channel 1/0
May 8 15:24:39 sch391 kernel: aic7xxx: (abort_reset) scb state 0x1, Message-In phase, SCSISIGI = 0x14
May 8 15:24:39 sch391 kernel: aic7xxx: (abort_scb) asserted ATN - bus device reset in message buffer.
May 8 15:24:39 sch391 kernel: scsi : aborting command due to timeout : pid 74103, scsi0, channel 0, id 0, lun 0 Write (6) 1a 88 0c 02 00
May 8 15:24:39 sch391 kernel: aic7xxx: (abort) Aborting scb 3, TCL 0/0/0
May 8 15:24:39 sch391 kernel: SCSI host 0 abort (pid 74103) timed out - resetting
May 8 15:24:39 sch391 kernel: SCSI bus is being reset for host 0 channel 0.
May 8 15:24:39 sch391 kernel: aic7xxx: (reset) target/channel 0/0
May 8 15:24:39 sch391 kernel: aic7xxx: (abort_reset) scb state 0x1, Message-In phase, SCSISIGI = 0x14
May 8 15:24:39 sch391 kernel: aic7xxx: (abort_scb) asserted ATN - bus device reset in message buffer.
May 8 15:24:39 sch391 kernel: SCSI host 0 channel 0 reset (pid 74101) timed out - trying harder
May 8 15:24:39 sch391 kernel: SCSI bus is being reset for host 0 channel 0.
May 8 15:24:39 sch391 kernel: aic7xxx: (reset) target/channel 1/0
May 8 15:24:39 sch391 kernel: aic7xxx: (reset_device) target/channel -1/A, active_scb 1
May 8 15:24:39 sch391 kernel: aic7xxx: (match_scb) comparing target/channel -1/A to scb 1/A
May 8 15:24:39 sch391 kernel: aic7xxx: (reset_device) aborting SCB 2, TCL=1/0/0
May 8 15:24:39 sch391 kernel: aic7xxx: (match_scb) comparing target/channel -1/A to scb 0/A
May 8 15:24:39 sch391 kernel: aic7xxx: (reset_device) aborting SCB 3, TCL=0/0/0
May 8 15:24:39 sch391 kernel: aic7xxx: (match_scb) comparing target/channel -1/A to scb 0/A
May 8 15:24:39 sch391 kernel: aic7xxx: (match_scb) comparing target/channel -1/A to scb 1/A
May 8 15:24:39 sch391 kernel: aic7xxx: (match_scb) comparing target/channel -1/A to scb 0/A
May 8 15:24:39 sch391 kernel: aic7xxx: (match_scb) comparing target/channel -1/A to scb 1/A
May 8 15:24:39 sch391 kernel: aic7xxx: (match_scb) comparing target/channel -1/A to scb 1/A
May 8 15:24:39 sch391 kernel: aic7xxx: (match_scb) comparing target/channel -1/A to scb 0/A
May 8 15:24:39 sch391 kernel: aic7xxx: (reset_channel) Resetting current channel A
May 8 15:24:39 sch391 kernel: aic7xxx: (reset_channel) Channel reset, sequencer restarted
May 8 15:24:39 sch391 kernel: aic7xxx: (done_aborted_scbs) Aborting scb 0, TCL=0/0/0
May 8 15:24:39 sch391 kernel: aic7xxx: (done_aborted_scbs) Aborting scb 1, TCL=1/0/0
May 8 15:24:39 sch391 kernel: aic7xxx: (done_aborted_scbs) Aborting scb 2, TCL=1/0/0
May 8 15:24:39 sch391 kernel: aic7xxx: (done_aborted_scbs) Aborting scb 3, TCL=0/0/0
May 8 15:24:39 sch391 kernel: scsi0: Received MSG_WDTR, Target 0, channel A needwdtr(0xffff).
May 8 15:24:39 sch391 kernel: scsi0: Target 1, channel A, now synchronous at 10.0MHz, offset 15.
May 8 15:24:39 sch391 kernel: scsi0: Target 0, channel A, now synchronous at 10.0MHz, offset 15.
May 8 15:25:25 sch391 kernel: scsi0: Target 6, channel A, refusing WIDE negotiation; using 8 bit transfers.
May 8 15:25:25 sch391 kernel: st0: Error with sense data: extra data not valid Current error st09:00: sense key Unit Attention
May 8 15:25:25 sch391 kernel: Additional sense indicates Not ready to ready transition (medium may have changed)
--------------3FB6364D4AB6BF863320E177--
