[169] in linux-scsi channel archive
Re: Welcome to linux-scsi
daemon@ATHENA.MIT.EDU (Drew Eckhardt)
Mon May 15 13:58:02 1995
To: jamiev@bws.com
cc: linux-scsi@vger.rutgers.edu
In-reply-to: Your message of "09 May 1995 10:09:07 -0000."
<1995May09.100911+0000@jamiev.bws.com>
Date: Mon, 15 May 1995 10:58:38 MDT
From: Drew Eckhardt <drew@boulder.openware.com>
In message <1995May09.100911+0000@jamiev.bws.com>, jamiev@bws.com writes:
> Supported Configurations:
>
> Ports:
> 0x330 and 0x334
>
> Autoprobe override:
> none
>
>
>How do I correctly form the statement to enter at the boot:
>prompt? So far I have tried variations of
>
>boot: ramdisk aha154x=PORT,IRQ,DMA
Note the line that says Autoprobe override: none. This means there
is no command line override.
>with no success, still no SCSI devices detected. How should I
>enter the above? I suspect this is my problem altogether, but I
>am not sure. The 154xCF is configured for port 0x230, irq 11,
>dma 5, and base io 0xDC000. I noticed the adapter is configured
>for port 230 and not 330 or 334 as the SCSI-HOWTO suggests, but
>does this mean the aha154x on the SCSI boot disk a will only work
>with these ports and not 230?
Yes.
