[1221] in linux-scsi channel archive
What was that? ncrBsd-1.1b.
daemon@ATHENA.MIT.EDU (Boris Tobotras)
Tue Jan 7 01:53:46 1997
To: linux-scsi@vger.rutgers.edu
Date: Sat, 04 Jan 1997 22:42:33 +0300
From: Boris Tobotras <boris@xtalk.msk.su>
Hello,
I'm running 2.1.20. Had short (5sec) lock, then system continued
to work. Here's appropriate dmesg (having verb:2):
ncr53c8xx : at PCI bus 0, device 17, function 0
ncr_attach: unit=0 chip=810 base=e0800000, io_port=6100, irq=9
ncr53c810-0: using memory mapped IO at virtual address 0x1811000
ncr53c810-0: assuming 40MHz clock
ncr53c810-0: initial value of SCNTL3 = 03, final = 13
ncr53c810-0: requesting shared irq 9 (dev_id=0x8068)
ncr53c810-0: restart (scsi reset).
scsi0 : ncr53c8xx - revision 1.16b
scsi : 1 host.
ncr53c810-0-<0,0>: using tagged command queueing, up to 4 cmds/lun
Vendor: CONNER Model: CP30540 SUN0535 Rev: B0BB
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: QUANTUM Model: MAVERICK 540S Rev: 0905
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
scsi : detected 2 SCSI disks total.
ncr53c810-0-<0,0>: sync msgout: 1-3-1-19-8.
ncr53c810-0-<0,0>: sync msgin: 1-3-1-19-8.
ncr53c810-0-<0,0>: sync: per=25 scntl3=0x10 ofs=8 fak=0 chg=0.
ncr53c810-0-<0,0>: FAST SCSI-2 10.0 MB/s (100 ns, offset 8)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 1065912 [520 MB] [0.5 GB]
ncr53c810-0-<1,0>: sync msgout: 1-3-1-19-8.
ncr53c810-0-<1,0>: sync msgin: 1-3-1-19-8.
ncr53c810-0-<1,0>: sync: per=25 scntl3=0x10 ofs=8 fak=0 chg=0.
ncr53c810-0-<1,0>: FAST SCSI-2 10.0 MB/s (100 ns, offset 8)
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 1057758 [516 MB] [0.5 GB]
PPP: version 2.2.0 (dynamic channel allocation)
TCP compression code copyright 1989 Regents of the University of California
PPP Dynamic channel allocation code copyright 1995 Caldera, Inc.
PPP line discipline registered.
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
Partition check:
sda: sda1 sda2
sdb: sdb1 sdb2
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 26604k swap-space (priority -1)
Adding Swap: 25580k swap-space (priority -2)
[skipped, here is it:]
scsi : aborting command due to timeout : pid 66104, scsi0, channel 0, id 0, lun 0 Read (6) 10 01 ce 08 00
ncr53c8xx_abort : abort call
scsi : aborting command due to timeout : pid 66105, scsi0, channel 0, id 0, lun 0 Write (6) 00 3e f8 08 00
ncr53c8xx_abort : abort call
ncr53c810-0: abort ccb=c027d018 (skip)
scsi : aborting command due to timeout : pid 66106, scsi0, channel 0, id 0, lun 0 Write (6) 00 3f 00 08 00
ncr53c8xx_abort : abort call
ncr53c810-0: abort ccb=c0090810 (skip)
scsi : aborting command due to timeout : pid 66107, scsi0, channel 0, id 0, lun 0 Write (6) 00 3f 08 20 00
ncr53c8xx_abort : abort call
ncr53c810-0: abort ccb=c0099810 (skip)
SCSI host 0 abort (pid 66105) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
ncr53c810-0: restart (scsi bus reset).
ncr53c810-0-<0,0>: sync msgout: 1-3-1-19-8.
ncr53c810-0-<0,0>: sync msgout: 1-3-1-19-8.
ncr53c810-0-<0,0>: sync msgout: 1-3-1-19-8.
ncr53c810-0-<0,0>: sync msgout: 1-3-1-19-8.
ncr53c810-0-<0,0>: sync msgin: 1-3-1-19-8.
ncr53c810-0-<0,0>: sync: per=25 scntl3=0x10 ofs=8 fak=0 chg=0.
ncr53c810-0-<0,0>: FAST SCSI-2 10.0 MB/s (100 ns, offset 8)
ncr53c810-0-<0,0>: sync msgin: 1-3-1-19-8.
ncr53c810-0-<0,0>: sync: per=25 scntl3=0x10 ofs=8 fak=0 chg=0.
ncr53c810-0-<0,0>: sync msgin: 1-3-1-19-8.
ncr53c810-0-<0,0>: sync: per=25 scntl3=0x10 ofs=8 fak=0 chg=0.
ncr53c810-0-<0,0>: sync msgin: 1-3-1-19-8.
ncr53c810-0-<0,0>: sync: per=25 scntl3=0x10 ofs=8 fak=0 chg=0.
--
Best regards, -- Boris.
