[1130] in linux-scsi channel archive
Adaptec AHA-2940
daemon@ATHENA.MIT.EDU (Matthew Cummings)
Thu Dec 19 08:33:36 1996
Date: Thu, 19 Dec 1996 07:28:34 -0600
From: Matthew Cummings <cummings@mcmsys.com>
To: linux-scsi@vger.rutgers.edu
I have a problem with an Adaptec AHA-2940K controller locking up the
computer if the drives are used very hard, as in use by a full feed news
server. It gets timeouts and trys to reset the buss, but that's as much
as ever happens, just keeps trying.
I'm running 2.0.27 and libc 5.4.7 and using Inn unoff4 for the server
with 64 megs of ram.
Can anybody help me out and point me in a direction to keep this thing
from locking up?
Adaptec AIC7xxx driver version: 4.0/3.2/4.0
Compile Options:
AIC7XXX_RESET_DELAY : 15
AIC7XXX_TWIN_SUPPORT : Enabled
AIC7XXX_TAGGED_QUEUEING: Disabled
AIC7XXX_PAGE_ENABLE : Disabled
AIC7XXX_PROC_STATS : Disabled
Adapter Configuration:
SCSI Adapter: AHA-2940
(AIC-787x chipset)
Host Bus: Single
Base IO: 0x6100
IRQ: 9
SCBs: Used 4, HW 16, Page 16
Interrupts: 90983
Serial EEPROM: True
Extended Translation: Enabled
SCSI Bus Reset: Enabled
Ultra SCSI: Disabled
Target Disconnect: Enabled
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: IBM Model: DORS-32160 Rev: S82C
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: IBM Model: DORS-32160 Rev: S82C
Type: Direct-Access ANSI SCSI revision: 02
--
cummings@mcmsys.com
http://www.mcmsys.com/~cummings
