[4541] in linux-net channel archive
Problems with smc8432 network card
daemon@ATHENA.MIT.EDU (Dipl.-Phys. M. Braun)
Thu Sep 26 23:14:14 1996
Date: Thu, 26 Sep 1996 15:32:29 +0200
From: "Dipl.-Phys. M. Braun" <braun@itwm.uni-kl.de>
To: linux-net@vger.rutgers.edu
CC: linux-smp@vger.rutgers.edu, braun@itwm.uni-kl.de
This is a multi-part message in MIME format.
--------------47937DED6FDC651A1DDF86F3
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hello all,
I can't get a smc8432 PCI - network card to work with Linux 2.0.21
(tulip driver). Symptoms are:
1) the card works under DOS.
2) it is found by the linux kernel
3) network activity results in kernel messages about choosing
different ports.
4) Building a kernel without SMP - support does not make a difference.
This is an Elitegroup P6FX2-A motherboard with AMI - Bios.
Boot messages:
--------------47937DED6FDC651A1DDF86F3
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="b"
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: 82440FX APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 17
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
Console: 8 point font, 400 scans
Console: colour VGA+ 80x50, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fdb70
pcibios_init : BIOS32 Service Directory entry at 0xfdb80
pcibios_init : PCI BIOS revision 2.10 entry at 0xfdba1
Probing PCI hardware.
Calibrating delay loop.. ok - 199.07 BogoMIPS
Memory: 63000k/65536k available (864k kernel code, 384k reserved, 1288k data)
This processor honours the WP bit even when in supervisor mode. Good.
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.12 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.21 (root@p5.itwm.uni-kl.de) (gcc version 2.7.2.l.3) #7 Mon Sep 23 23:17:04 MET DST 1996
Booting processor 0 stack 00002000: Calibrating delay loop.. ok - 199.07 BogoMIPS
Total of 2 processors activated (398.13 BogoMIPS).
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
lp1 at 0x0378, (polling)
Real Time Clock Driver v1.07
Ramdisk driver initialized : 16 ramdisks of 4096K size
ide: i82371 PIIX (Triton) on PCI bus 0 function 57
ide0: BM-DMA at 0xffa0-0xffa7
ide1: BM-DMA at 0xffa8-0xffaf
hda: FUJITSU M1636TAU, 1226MB w/128kB Cache, LBA, CHS=622/64/63, DMA
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
Started kswapd v 1.4.2.2
FDC 0 is a post-1991 82077
aic7xxx: BurstLen = 8 DWDs, Latency Timer = 32 PCLKS
aic7xxx: AHA-2940 Ultra Rev B.
aic7xxx: devconfig = 0x1580.
aic7xxx: Reading SEEPROM...done.
aic7xxx: Enabling support for Ultra SCSI speed.
aic7xxx: Extended translation enabled.
aic7xxx: Memory check yields 16 SCBs, paging not enabled.
aic7xxx: Enabling wide channel of AHA-2940 Ultra-Wide.
AHA-2940 Ultra-WIDE (PCI-bus), I/O 0xec00, Mem 0xfebef000:
irq 11
bus release time 40 bclks
data fifo threshold 100%
SCSI CHANNEL A:
scsi id 7
scsi selection timeout 256 ms
scsi bus reset at power-on enabled
scsi bus parity enabled
scsi bus termination (low byte) enabled
scsi bus termination (high byte) enabled
aic7xxx: Downloading sequencer code...done.
aic7xxx: Resetting the SCSI bus...done.
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 3.4/3.2/3.1
scsi : 1 host.
scsi0: Scanning channel A for devices.
scsi0: Received MSG_WDTR, Target 0, channel A needwdtr(0xffff).
scsi0: Target 0, channel A, using 16 bit transfers.
scsi0: Target 0, channel A, now synchronous at 10.0MHz, offset 8.
Vendor: Quantum Model: XP34300W Rev: L912
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
scsi0: Received MSG_WDTR, Target 1, channel A needwdtr(0xfffe).
scsi0: Target 1, channel A, using 16 bit transfers.
scsi0: Target 1, channel A, now synchronous at 10.0MHz, offset 8.
Vendor: Quantum Model: XP34300W Rev: L912
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
scsi : detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8399520 [4101 MB] [4.1 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8399520 [4101 MB] [4.1 GB]
PPP: version 2.2.0 (dynamic channel allocation)
TCP compression code copyright 1989 Regents of the University of California
PPP Dynamic channel allocation code copyright 1995 Caldera, Inc.
PPP line discipline registered.
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
tulip.c:v0.10 8/11/95 becker@cesdis.gsfc.nasa.gov
+0.72 4/17/96 http://www.dsl.tutics.tut.ac.jp/~linux/tulip
eth0: smc8432 (DEC 21041 Tulip) at 0x7c00, 00:00:c0:dc:ee:ce, IRQ 10
Partition check:
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sdb: sdb1
hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 130748k swap-space
Adding Swap: 130748k swap-space
eth0: enabling 10TP port.
eth0: enabling AUI port.
eth0: enabling BNC port.
eth0: enabling 10TP port.
eth0: enabling AUI port.
eth0: enabling BNC port.
eth0: enabling 10TP port.
--------------47937DED6FDC651A1DDF86F3
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="pci.log"
PCI devices found:
Bus 0, device 12, function 0:
VGA compatible controller: S3 Inc. Trio32/Trio64 (rev 84).
Medium devsel.
Non-prefetchable 32 bit memory at 0xf8000000.
Bus 0, device 11, function 0:
SCSI storage controller: Adaptec AIC-7881U (rev 0).
Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable. Latency=32. Min Gnt=8.Max Lat=8.
I/O at 0xec00.
Non-prefetchable 32 bit memory at 0xfebef000.
Bus 0, device 10, function 0:
Ethernet controller: DEC DC21041 (rev 17).
Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable. Latency=32.
I/O at 0x7c80.
Non-prefetchable 32 bit memory at 0xfebeef80.
Bus 0, device 7, function 1:
IDE interface: Intel 82371SB Natoma/Triton II PIIX3 (rev 0).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
I/O at 0xffa0.
Bus 0, device 7, function 0:
ISA bridge: Intel 82371SB Natoma/Triton II PIIX3 (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
Bus 0, device 0, function 0:
Host bridge: Intel 82441FX Natoma (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
--------------47937DED6FDC651A1DDF86F3--
