[1517] in linux-announce channel archive

home help back first fref pref prev next nref lref last post

Full featured Win95 dialup to Linux

daemon@ATHENA.MIT.EDU (Lars Wirzenius)
Sat Jan 13 17:44:36 1996

Date: 	Sun, 7 Jan 1996 21:16:55 +0200
From: Lars Wirzenius <wirzeniu@cc.helsinki.fi>
To: linux-announce@vger.rutgers.edu

From: clameter@fuller.edu (Christoph Lameter)
Newsgroups: comp.os.linux.announce
Subject: Full featured Win95 dialup to Linux
Organization: Fuller Theological Seminary, Pasadena, CA 91182
Approved: linux-announce@news.ornl.gov (Lars Wirzenius)
Followup-to: comp.os.linux.networking

-----BEGIN PGP SIGNED MESSAGE-----

Short Guide on How to run a Win95 Connection with PPPD
- ------------------------------------------------------

1. Do not mess around with the Win95 configuration.
   Do not manually configure DNS, Scripts etc.
   Do not switch on the terminal windows.
   Accept all defaults or better leave it as
   it was at installation.

2. You need to have a getty program that supports
   automatic PPP protocol detection such as mgetty-0.99.
   Mgetty is available from

	hpsystem2.informatik.tu-muenchen.de:
	/pub/comp/networking/communication/modem/mgetty 

   Install mgetty and enable the following line in
   /usr/local/etc/mgetty+sendfax/login.config:

# Automatic PPP startup on receipt of LCP configure request.
#  mgetty has to be compiled with "-DAUTO_PPP" for this to work.
#  Warning: Case is significant, AUTOPPP or autoppp won't work!
#
/AutoPPP/ -     -       /usr/sbin/pppd auth -chap +pap login passive
 
3. Configure PPP on Linux
     A) Add a line
		dns-addr 192.168.1.1
	to your /etc/ppp/options file. Be sure to replace
	192.168.1.1 with a valid Name Server IP Address.

     B) Make sure that your /etc/ppp/pap-secrets file is set
        up correctly. It should allow your users in /etc/passwd
	to establish ppp connections without a password. pppd will
	check against passwords in /etc/passwd!
	If you are having trouble with authentication then remove
	/etc/ppp/pap-secrets completely and it will usually work.

4. Configure Win95
	Click on Dialup-Connection
	A. Enter phone number of your linux server
	B. Enter username when prompted
	C. Enter password when prompted

Win95 should connect to your Linux PPPD without problems and automatically
configure all IP-Addresses, Netmasks and DNS Servers. You can immediately
start Netscape, Internet Explorer or any other TCP/IP tools.

Christoph Lameter, Jan 3, 1995 (clameter@fuller.edu)



-----BEGIN PGP SIGNATURE-----
Version: 2.6.2i

iQCVAwUBMPAaW4QRll5MupLRAQFvYwP9FACdUOpw+xXRanmrA60WXcPiKkFTaAeS
hA5QVGsXg5aPgdqjLZW1sF1vPuSbFxQ/xLgfiFjKEjHDyCKMpRHy6zqoVfREu/II
leEe+wIl1EnIBquuc3OdrelYOA7xJNhiX93FPhK3UbU0k9m45ULMMaESDT+28tEv
iF3id5l8p7w=
=Al6c
-----END PGP SIGNATURE-----

-- 
This article has been digitally signed by the moderator, using PGP.
Finger wirzeniu@kruuna.helsinki.fi for PGP key needed for validating signature.
Send submissions for comp.os.linux.announce to: linux-announce@news.ornl.gov
PLEASE remember a short description of the software and the LOCATION.



home help back first fref pref prev next nref lref last post