[77533] in Hotline Meeting
Case 584242: Fuser error on wg-tang
daemon@ATHENA.MIT.EDU (hotline@MIT.EDU)
Mon May 24 11:27:32 2004
From: hotline@MIT.EDU
Date: Mon, 24 May 2004 11:27:19 -0400 (EDT)
Message-ID: <15965589.1085412439488.JavaMail.root@sheep.mit.edu>
To: larugsi@mit.edu
Cc: hotline@mit.edu
Errors-To: cadm@MIT.EDU
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
I have replaced the low voltage power supply.
I had great difficulty/frustration due to the confined space and all the stupid KSL Locks.
I was unable to get the machine to the left of the printer unlocked, so I had to pull the monitor cables out. However, I can't get them back in. None of my keys work. It's still unplugged.
Also, when I put the printer back into it's anchor, the printer came right off the pad. Sure don't make 'em like they used to.
[5/24/2004 11:27:18 panza Comment]
===========================================================
Please retain the case reference in the subject line for future replies associated with this case
Case History
==================
5/18/2004 15:55:56 daemon Email Received
Date: Tue, 18 May 2004 15:27:54 -0400
To: hotline@MIT.EDU
From: Jonathan Reed <jdreed@MIT.EDU>
Cc: rccsuper@MIT.EDU
Subject: Fuser error on wg-tang
wg-tang is reporting a "50.1 FUSER ERROR". I have downed the queue.
I'm not sure if a fuser error is something that the dorm needs to pay
for or not.
As a reminder, you can up the queue by:
athena% lpc up wg-tang
athena% lpc msg wg-tang
Thanks,
Jon
--
-------------------
Jonathan Reed
jdreed@mit.edu
-------------------
5/20/2004 0:28:45 larugsi Comment
Have forwarded to pcservice. Sounds like a possible low voltage
power supply.
--Lou
5/20/2004 0:28:45 larugsi Other
Category changed from Hotline:Hardware to PC-Service
5/21/2004 8:20:46 panza Comment
We are still waiting on the necessary parts for this repair...
PC Service
5/21/2004 8:20:47 panza Email Sent
(Through the web interface)
To: JDREED@MIT.EDU
Cc:
Bcc:
Subject: Case 584242: Fuser error on wg-tang
Contents: Entire case history
5/24/2004 11:27:16 panza Comment
I have replaced the low voltage power supply.
I had great difficulty/frustration due to the confined space and all the stupid KSL Locks.
I was unable to get the machine to the left of the printer unlocked, so I had to pull the monitor cables out. However, I can't get them back in. None of my keys work. It's still unplugged.
Also, when I put the printer back into it's anchor, the printer came right off the pad. Sure don't make 'em like they used to.
5/24/2004 11:27:17 panza Closed Case
Case closed.
