[43435] in Hotline Meeting
Printer Picus up and running
daemon@ATHENA.MIT.EDU (Kyle E. Pope)
Mon May 18 08:29:57 1998
To: hotline@MIT.EDU
Cc: pcservice@MIT.EDU
Date: Mon, 18 May 1998 08:29:26 EDT
From: "Kyle E. Pope" <ndpope@MIT.EDU>
Picus was jamming at the exit area. I replaced the Output Assembly.
Working fine now on single- and double-sided.
Printer name: Picus (4si)
Printer location: E51-007
Printer s/n: USBB115688
Printer tag#: MIT-0271165
Problem reported: see below
Parts used: Output Assembly (RG5-0381)
CLOSED
Kyle Pope
ndpope@mit.edu
MIT PC Service
pcservice@mit.edu
------- Forwarded Message
Received: from SOUTH-STATION-ANNEX.MIT.EDU by po10.MIT.EDU (5.61/4.7) id AA24978; Sun, 17 May 98 16:51:44 EDT
Received: from HECTOR.MIT.EDU by MIT.EDU with SMTP
id AA14368; Sun, 17 May 98 16:51:12 EDT
From: jjmorey@MIT.EDU
Received: by hector.MIT.EDU (5.57/4.7) id AA20330; Sun, 17 May 98 16:51:17 -0400
Date: Sun, 17 May 98 16:51:17 -0400
Message-Id: <9805172051.AA20330@hector.MIT.EDU>
To: pcservice@MIT.EDU
/***** hector:hotline / priam!jjmorey / 4:51 pm May 17, 1998*/
picus e51-075 jam'n
picus was found jam'd early unjam'd it and jam came back after it
goes thru fuser it seems to jam in the exit are, i tried another
fuser unit no go, Im putting the original back in.
Kyle please check on this one also monday.
Thanks
JJ
Yo Pc'ers -
I spent more time on this and found a piece of black plastic
broken off inside that was jam'n the gears, the printer now
jams less but still jams in the same place, I've unplug'd in
from both ends and left the jam in it so you can see for
yourself.
5.17.98
1650hrs
JJ
/* ---------- */
------- End of Forwarded Message
