[6467] in Perl-Users-Digest
Perl-Users Digest, Issue: 93 Volume: 8
daemon@ATHENA.MIT.EDU (Perl-Users Digest)
Tue Mar 11 19:18:01 1997
Date: Tue, 11 Mar 97 16:03:59 -0800
From: Perl-Users Digest <Perl-Users-Request@ruby.OCE.ORST.EDU>
To: Perl-Users@ruby.OCE.ORST.EDU (Perl-Users Digest)
Perl-Users Digest Tue, 11 Mar 1997 Volume: 8 Number: 93
Today's topics:
Perl FAQ part 5 of 0..9: Files and Formats [Periodic Po <tchrist@mox.perl.com>
Digest Administrivia (Last modified: 8 Mar 97) (Perl-Users-Digest Admin)
----------------------------------------------------------------------
Date: 11 Mar 1997 23:25:01 GMT
From: Tom Christiansen <tchrist@mox.perl.com>
Subject: Perl FAQ part 5 of 0..9: Files and Formats [Periodic Posting]
Message-Id: <5g4pkd$frn$1@csnews.cs.colorado.edu>
=head1 NAME
perlfaq5 - Files and Formats ($Revision: 1.18 $)
=head1 DESCRIPTION
This section deals with I/O and the "f" issues: filehandles, flushing,
formats, and footers.
=head2 How do I flush/unbuffer a filehandle? Why must I do this?
The C standard I/O library (stdio) normally buffers characters sent to
devices. This is done for efficiency reasons, so that there isn't a
system call for each byte. Any time you use print() or write() in
Perl, you go though this buffering. syswrite() circumvents stdio and
buffering.
In most stdio implementations, the type of buffering and the size of
the buffer varies according to the type of device. Disk files are block
buffered, often with a buffer size of more than 2k. Pipes and sockets
are often buffered with a buffer size between 1/2 and 2k. Serial devices
(e.g. modems, terminals) are normally line-buffered, and stdio sends
the entire line when it gets the newline.
Perl does not support truly unbuffered output (except insofar as you can
C<syswrite(OUT, $char, 1)>). What it does instead support is "command
buffering", in which a physical write is performed after every output
command. This isn't as hard on your system as unbuffering, but does
get the output where you want it when you want it.
If you expect characters to get to your device when you print them there,
you'll want to autoflush its handle, as in the older:
use FileHandle;
open(DEV, "<+/dev/tty"); # ceci n'est pas une pipe
DEV->autoflush(1);
or the newer IO::* modules:
use IO::Handle;
open(DEV, ">/dev/printer"); # but is this?
DEV->autoflush(1);
or even this:
use IO::Socket; # this one is kinda a pipe?
$sock = IO::Socket::INET->new(PeerAddr => 'www.perl.com',
PeerPort => 'http(80)',
Proto => 'tcp');
die "$!" unless $sock;
$sock->autoflush();
$sock->print("GET /\015\012");
$document = join('', $sock->getlines());
print "DOC IS: $document\n";
Note the hardcoded carriage return and newline in their octal
equivalents. This is the ONLY way (currently) to assure a proper
flush on all platforms, including Macintosh.
You can use select() and the C<$|> variable to control autoflushing
(see L<perlvar/$|> and L<perlfunc/select>):
$oldh = select(DEV);
$| = 1;
select($oldh);
You'll also see code that does this without a temporary variable, as in
select((select(DEV), $| = 1)[0]);
=head2 How do I change one line in a file/delete a line in a file/insert a line in the middle of a file/append to the beginning of a file?
Although humans have an easy time thinking of a text file as being a
sequence of lines that operates much like a stack of playing cards --
or punch cards -- computers usually see the text file as a sequence of
bytes. In general, there's no direct way for Perl to seek to a
particular line of a file, insert text into a file, or remove text
from a file.
(There are exceptions in special circumstances. Replacing a sequence
of bytes with another sequence of the same length is one. Another is
using the C<$DB_RECNO> array bindings as documented in L<DB_File>.
Yet another is manipulating files with all lines the same length.)
The general solution is to create a temporary copy of the text file with
the changes you want, then copy that over the original.
$old = $file;
$new = "$file.tmp.$$";
$bak = "$file.bak";
open(OLD, "< $old") or die "can't open $old: $!";
open(NEW, "> $new") or die "can't open $new: $!";
# Correct typos, preserving case
while (<OLD>) {
s/\b(p)earl\b/${1}erl/i;
(print NEW $_) or die "can't write to $new: $!";
}
close(OLD) or die "can't close $old: $!";
close(NEW) or die "can't close $new: $!";
rename($old, $bak) or die "can't rename $old to $bak: $!";
rename($new, $old) or die "can't rename $new to $old: $!";
Perl can do this sort of thing for you automatically with the C<-i>
command-line switch or the closely-related C<$^I> variable (see
L<perlrun> for more details). Note that
C<-i> may require a suffix on some non-Unix systems; see the
platform-specific documentation that came with your port.
# Renumber a series of tests from the command line
perl -pi -e 's/(^\s+test\s+)\d+/ $1 . ++$count /e' t/op/taint.t
# form a script
local($^I, @ARGV) = ('.bak', glob("*.c"));
while (<>) {
if ($. == 1) {
print "This line should appear at the top of each file\n";
}
s/\b(p)earl\b/${1}erl/i; # Correct typos, preserving case
print;
close ARGV if eof; # Reset $.
}
If you need to seek to an arbitrary line of a file that changes
infrequently, you could build up an index of byte positions of where
the line ends are in the file. If the file is large, an index of
every tenth or hundredth line end would allow you to seek and read
fairly efficiently. If the file is sorted, try the look.pl library
(part of the standard perl distribution).
=head2 How do I count the number of lines in a file?
One fairly efficient way is to count newlines in the file. The
following program uses a feature of tr///, as documented in L<perlop>.
If your text file doesn't end with a newline, then it's not really a
proper text file, so this may report one fewer line than you expect.
$lines = 0;
open(FILE, $filename) or die "Can't open `$filename': $!";
while (sysread FILE, $buffer, 4096) {
$lines += ($buffer =~ tr/\n//);
}
close FILE;
=head2 How do I make a temporary file name?
Use the process ID and/or the current time-value. If you need to have
many temporary files in one process, use a counter:
BEGIN {
use IO::File;
use Fcntl;
my $temp_dir = -d '/tmp' ? '/tmp' : $ENV{TMP} || $ENV{TEMP};
my $base_name = sprintf("%s/%d-%d-0000", $temp_dir, $$, time());
sub temp_file {
my $fh = undef;
my $count = 0;
until (defined($fh) || $count > 100) {
$base_name =~ s/-(\d+)$/"-" . (1 + $1)/e;
$fh = IO::File->new($base_name, O_WRONLY|O_EXCL|O_CREAT, 0644)
}
if (defined($fh)) {
return ($fh, $base_name);
} else {
return ();
}
}
}
Or you could simply use IO::Handle::new_tmpfile.
=head2 How can I manipulate fixed-record-length files?
The most efficient way is using pack() and unpack(). This is faster
than using substr(). Here is a sample chunk of code to break up and
put back together again some fixed-format input lines, in this case
from the output of a normal, Berkeley-style ps:
# sample input line:
# 15158 p5 T 0:00 perl /home/tchrist/scripts/now-what
$PS_T = 'A6 A4 A7 A5 A*';
open(PS, "ps|");
$_ = <PS>; print;
while (<PS>) {
($pid, $tt, $stat, $time, $command) = unpack($PS_T, $_);
for $var (qw!pid tt stat time command!) {
print "$var: <$$var>\n";
}
print 'line=', pack($PS_T, $pid, $tt, $stat, $time, $command),
"\n";
}
=head2 How can I make a filehandle local to a subroutine? How do I pass filehandles between subroutines? How do I make an array of filehandles?
You may have some success with typeglobs, as we always had to use
in days of old:
local(*FH);
But while still supported, that isn't the best to go about getting
local filehandles. Typeglobs have their drawbacks. You may well want
to use the C<FileHandle> module, which creates new filehandles for you
(see L<FileHandle>):
use FileHandle;
sub findme {
my $fh = FileHandle->new();
open($fh, "</etc/hosts") or die "no /etc/hosts: $!";
while (<$fh>) {
print if /\b127\.(0\.0\.)?1\b/;
}
# $fh automatically closes/disappears here
}
Internally, Perl believes filehandles to be of class IO::Handle. You
may use that module directly if you'd like (see L<IO::Handle>), or
one of its more specific derived classes.
=head2 How can I set up a footer format to be used with write()?
There's no built-in way to do this, but L<perlform> has a couple of
techniques to make it possible for the intrepid hacker.
=head2 How can I use write() into a string?
See L<perlform> for an swrite() function.
=head2 How can I output my numbers with commas added?
This one will do it for you:
sub commify {
local $_ = shift;
1 while s/^(-?\d+)(\d{3})/$1,$2/;
return $_;
}
$n = 23659019423.2331;
print "GOT: ", commify($n), "\n";
GOT: 23,659,019,423.2331
You can't just:
s/^(-?\d+)(\d{3})/$1,$2/g;
because you have to put the comma in and then recalculate your
position.
=head2 How can I translate tildes (~) in a filename?
Use the E<lt>E<gt> (glob()) operator, documented in L<perlfunc>. This
requires that you have a shell installed that groks tildes, meaning
csh or tcsh or (some versions of) ksh, and thus may have portability
problems. The Glob::KGlob module (available from CPAN) gives more
portable glob functionality.
Within Perl, you may use this directly:
$filename =~ s{
^ ~ # find a leading tilde
( # save this in $1
[^/] # a non-slash character
* # repeated 0 or more times (0 means me)
)
}{
$1
? (getpwnam($1))[7]
: ( $ENV{HOME} || $ENV{LOGDIR} )
}ex;
=head2 How come when I open the file read-write it wipes it out?
Because you're using something like this, which truncates the file and
I<then> gives you read-write access:
open(FH, "+> /path/name"); # WRONG
Whoops. You should instead use this, which will fail if the file
doesn't exist.
open(FH, "+< /path/name"); # open for update
If this is an issue, try:
sysopen(FH, "/path/name", O_RDWR|O_CREAT, 0644);
Error checking is left as an exercise for the reader.
=head2 Why do I sometimes get an "Argument list too long" when I use <*>?
The C<E<lt>E<gt>> operator performs a globbing operation (see above).
By default glob() forks csh(1) to do the actual glob expansion, but
csh can't handle more than 127 items and so gives the error message
C<Argument list too long>. People who installed tcsh as csh won't
have this problem, but their users may be surprised by it.
To get around this, either do the glob yourself with C<Dirhandle>s and
patterns, or use a module like Glob::KGlob, one that doesn't use the
shell to do globbing.
=head2 Is there a leak/bug in glob()?
Due to the current implementation on some operating systems, when you
use the glob() function or its angle-bracket alias in a scalar
context, you may cause a leak and/or unpredictable behavior. It's
best therefore to use glob() only in list context.
=head2 How can I open a file with a leading "E<gt>" or trailing blanks?
Normally perl ignores trailing blanks in filenames, and interprets
certain leading characters (or a trailing "|") to mean something
special. To avoid this, you might want to use a routine like this.
It makes incomplete pathnames into explicit relative ones, and tacks a
trailing null byte on the name to make perl leave it alone:
sub safe_filename {
local $_ = shift;
return m#^/#
? "$_\0"
: "./$_\0";
}
$fn = safe_filename("<<<something really wicked ");
open(FH, "> $fn") or "couldn't open $fn: $!";
You could also use the sysopen() function (see L<perlfunc/sysopen>).
=head2 How can I reliably rename a file?
Well, usually you just use Perl's rename() function. But that may
not work everywhere, in particular, renaming files across file systems.
If your operating system supports a mv(1) program or its moral equivalent,
this works:
rename($old, $new) or system("mv", $old, $new);
It may be more compelling to use the File::Copy module instead. You
just copy to the new file to the new name (checking return values),
then delete the old one. This isn't really the same semantics as a
real rename(), though, which preserves metainformation like
permissions, timestamps, inode info, etc.
=head2 How can I lock a file?
Perl's built-in flock() function (see L<perlfunc> for details) will
call flock(2) if that exists, fcntl(2) if it doesn't, and lockf(3) if
neither of the two previous system calls exists. On some systems, it
may even use native locking. Some gotchas with Perl's flock():
=over 4
=item 1
Produces a fatal error if none of the three system calls (or their
equivalent) exists.
=item 2
lockf(3) does not provide shared locking, and requires that the
filehandle be open for writing (or appending, or read/writing).
=item 3
Some versions of flock() can't lock files over a network (e.g. on NFS
file systems), so you'd need to force the use of fcntl(2) when you
build Perl (see the flock entry of L<perlfunc>, and the F<INSTALL>
file in the source distribution for information on building Perl to do
this).
=back
The CPAN module File::Lock offers similar functionality and (if you
have dynamic loading) won't require you to rebuild perl if your
flock() can't lock network files.
=head2 What can't I just open(FH, ">file.lock")?
A common bit of code B<NOT TO USE> is this:
sleep(3) while -e "file.lock";
open(LCK, "> file.lock");
This is a classic race condition: you take two steps to do something
which must be done in one. That's why computer hardware provides an
atomic test-and-set instruction. In theory, this "ought" to work:
sysopen(FH, "file.lock", O_WRONLY|O_EXCL|O_CREAT, 0644)
or die "can't open file.lock: $!":
except that lamentably, file creation (and deletion) is not atomic
over NFS, so this won't work (at least, not every time) over the net.
Various schemes involving involving link() have been suggested, but
these tend to involve busy-wait, which is also subdesirable.
=head2 I still don't get locking. I just want to increment the number in the file. How can I do this?
Didn't anyone ever tell you web-page hit counters were useless?
Anyway, this is what to do:
sysopen(FH, "numfile", O_RDWR|O_CREAT, 0644) or die "can't open numfile: $!";
flock(FH, 2) or die "can't flock numfile: $!";
$num = <FH> || 0;
seek(FH, 0, 0) or die "can't rewind numfile: $!";
truncate(FH, 0) or die "can't truncate numfile: $!";
(print FH $num+1, "\n") or die "can't write numfile: $!";
# DO NOT UNLOCK THIS UNTIL YOU CLOSE
close FH or die "can't close numfile: $!";
Here's a much better web-page hit counter:
$hits = int( (time() - 850_000_000) / rand(1_000) );
If the count doesn't impress your friends, then the code might. :-)
=head2 How do I randomly update a binary file?
If you're just trying to patch a binary, in many cases something as
simple as this works:
perl -i -pe 's{window manager}{window mangler}g' /usr/bin/emacs
However, if you have fixed sized records, then you might do something more
like this:
$RECSIZE = 220; # size of record, in bytes
$recno = 37; # which record to update
open(FH, "+<somewhere") || die "can't update somewhere: $!";
seek(FH, $recno * $RECSIZE, 0);
read(FH, $record, $RECSIZE) == $RECSIZE || die "can't read record $recno: $!";
# munge the record
seek(FH, $recno * $RECSIZE, 0);
print FH $record;
close FH;
Locking and error checking are left as an exercise for the reader.
Don't forget them, or you'll be quite sorry.
Don't forget to set binmode() under DOS-like platforms when operating
on files that have anything other than straight text in them. See the
docs on open() and on binmode() for more details.
=head2 How do I get a file's timestamp in perl?
If you want to retrieve the time at which the file was last read,
written, or had its meta-data (owner, etc) changed, you use the B<-M>,
B<-A>, or B<-C> filetest operations as documented in L<perlfunc>. These
retrieve the age of the file (measured against the start-time of your
program) in days as a floating point number. To retrieve the "raw"
time in seconds since the epoch, you would call the stat function,
then use localtime(), gmtime(), or POSIX::strftime() to convert this
into human-readable form.
Here's an example:
$write_secs = (stat($file))[9];
print "file $file updated at ", scalar(localtime($file)), "\n";
If you prefer something more legible, use the File::stat module
(part of the standard distribution in version 5.004 and later):
use File::stat;
use Time::localtime;
$date_string = ctime(stat($file)->mtime);
print "file $file updated at $date_string\n";
Error checking is left as an exercise for the reader.
=head2 How do I set a file's timestamp in perl?
You use the utime() function documented in L<perlfunc/utime>.
By way of example, here's a little program that copies the
read and write times from its first argument to all the rest
of them.
if (@ARGV < 2) {
die "usage: cptimes timestamp_file other_files ...\n";
}
$timestamp = shift;
($atime, $mtime) = (stat($timestamp))[8,9];
utime $atime, $mtime, @ARGV;
Error checking is left as an exercise for the reader.
Note that utime() currently doesn't work correctly with Win95/NT
ports. A bug has been reported. Check it carefully before using
it on those platforms.
=head2 How do I print to more than one file at once?
If you only have to do this once, you can do this:
for $fh (FH1, FH2, FH3) { print $fh "whatever\n" }
To connect up to one filehandle to several output filehandles, it's
easiest to use the tee(1) program if you have it, and let it take care
of the multiplexing:
open (FH, "| tee file1 file2 file3");
Otherwise you'll have to write your own multiplexing print function --
or your own tee program -- or use Tom Christiansen's, at
http://www.perl.com/CPAN/authors/id/TOMC/scripts/tct.gz, which is
written in Perl.
In theory a IO::Tee class could be written, but to date we haven't
seen such.
=head2 How can I read in a file by paragraphs?
Use the C<$\> variable (see L<perlvar> for details). You can either
set it to C<""> to eliminate empty paragraphs (C<"abc\n\n\n\ndef">,
for instance, gets treated as two paragraphs and not three), or
C<"\n\n"> to accept empty paragraphs.
=head2 How can I read a single character from a file? from the keyboard?
You can use the builtin C<getc()> function for most filehandles, but
it won't (easily) work on a terminal device. For STDIN, either use
the Term::ReadKey module from CPAN, or use the sample code in
L<perlfunc/getc>.
If your system supports POSIX, you can use the following code, which
you'll note turns off echo processing as well.
#!/usr/bin/perl -w
use strict;
$| = 1;
for (1..4) {
my $got;
print "gimme: ";
$got = getone();
print "--> $got\n";
}
exit;
BEGIN {
use POSIX qw(:termios_h);
my ($term, $oterm, $echo, $noecho, $fd_stdin);
$fd_stdin = fileno(STDIN);
$term = POSIX::Termios->new();
$term->getattr($fd_stdin);
$oterm = $term->getlflag();
$echo = ECHO | ECHOK | ICANON;
$noecho = $oterm & ~$echo;
sub cbreak {
$term->setlflag($noecho);
$term->setcc(VTIME, 1);
$term->setattr($fd_stdin, TCSANOW);
}
sub cooked {
$term->setlflag($oterm);
$term->setcc(VTIME, 0);
$term->setattr($fd_stdin, TCSANOW);
}
sub getone {
my $key = '';
cbreak();
sysread(STDIN, $key, 1);
cooked();
return $key;
}
}
END { cooked() }
The Term::ReadKey module from CPAN may be easier to use:
use Term::ReadKey;
open(TTY, "</dev/tty");
print "Gimme a char: ";
ReadMode "raw";
$key = ReadKey 0, *TTY;
ReadMode "normal";
printf "\nYou said %s, char number %03d\n",
$key, ord $key;
For DOS systems, Dan Carson <dbc@tc.fluke.COM> reports the following:
To put the PC in "raw" mode, use ioctl with some magic numbers gleaned
from msdos.c (Perl source file) and Ralf Brown's interrupt list (comes
across the net every so often):
$old_ioctl = ioctl(STDIN,0,0); # Gets device info
$old_ioctl &= 0xff;
ioctl(STDIN,1,$old_ioctl | 32); # Writes it back, setting bit 5
Then to read a single character:
sysread(STDIN,$c,1); # Read a single character
And to put the PC back to "cooked" mode:
ioctl(STDIN,1,$old_ioctl); # Sets it back to cooked mode.
So now you have $c. If C<ord($c) == 0>, you have a two byte code, which
means you hit a special key. Read another byte with C<sysread(STDIN,$c,1)>,
and that value tells you what combination it was according to this
table:
# PC 2-byte keycodes = ^@ + the following:
# HEX KEYS
# --- ----
# 0F SHF TAB
# 10-19 ALT QWERTYUIOP
# 1E-26 ALT ASDFGHJKL
# 2C-32 ALT ZXCVBNM
# 3B-44 F1-F10
# 47-49 HOME,UP,PgUp
# 4B LEFT
# 4D RIGHT
# 4F-53 END,DOWN,PgDn,Ins,Del
# 54-5D SHF F1-F10
# 5E-67 CTR F1-F10
# 68-71 ALT F1-F10
# 73-77 CTR LEFT,RIGHT,END,PgDn,HOME
# 78-83 ALT 1234567890-=
# 84 CTR PgUp
This is all trial and error I did a long time ago, I hope I'm reading the
file that worked.
=head2 How can I tell if there's a character waiting on a filehandle?
You should check out the Frequently Asked Questions list in
comp.unix.* for things like this: the answer is essentially the same.
It's very system dependent. Here's one solution that works on BSD
systems:
sub key_ready {
my($rin, $nfd);
vec($rin, fileno(STDIN), 1) = 1;
return $nfd = select($rin,undef,undef,0);
}
You should look into getting the ReadKey extension from CPAN.
=head2 How do I open a file without blocking?
You need to use the O_NDELAY or O_NONBLOCK flag from the Fcntl module
in conjunction with sysopen():
use Fcntl;
sysopen(FH, "/tmp/somefile", O_WRONLY|O_NDELAY|O_CREAT, 0644)
or die "can't open /tmp/somefile: $!":
=head2 How do I create a file only if it doesn't exist?
You need to use the O_CREAT and O_EXCL flags from the Fcntl module in
conjunction with sysopen():
use Fcntl;
sysopen(FH, "/tmp/somefile", O_WRONLY|O_EXCL|O_CREAT, 0644)
or die "can't open /tmp/somefile: $!":
Be warned that neither creation nor deletion of files is guaranteed to
be an atomic operation over NFS. That is, two processes might both
successful create or unlink the same file!
=head2 How do I do a C<tail -f> in perl?
First try
seek(GWFILE, 0, 1);
The statement C<seek(GWFILE, 0, 1)> doesn't change the current position,
but it does clear the end-of-file condition on the handle, so that the
next <GWFILE> makes Perl try again to read something.
If that doesn't work (it relies on features of your stdio implementation),
then you need something more like this:
for (;;) {
for ($curpos = tell(GWFILE); <GWFILE>; $curpos = tell(GWFILE)) {
# search for some stuff and put it into files
}
# sleep for a while
seek(GWFILE, $curpos, 0); # seek to where we had been
}
If this still doesn't work, look into the POSIX module. POSIX defines
the clearerr() method, which can remove the end of file condition on a
filehandle. The method: read until end of file, clearerr(), read some
more. Lather, rinse, repeat.
head2 How do I dup() a filehandle in Perl?
If you check L<perlfunc/open>, you'll see that several of the ways
to call open() should do the trick. For example:
open(LOG, ">>/tmp/logfile");
open(STDERR, ">&LOG");
Or even with a literal numeric descriptor:
$fd = $ENV{MHCONTEXTFD};
open(MHCONTEXT, "<&=$fd"); # like fdopen(3S)
Error checking has been left as an exercise for the reader.
head2 How do I close a file descriptor by number?
This should rarely be necessary, as the Perl close() function is to be
used for things that Perl opened itself, even if it was a dup of a
numeric descriptor, as with MHCONTEXT above. But if you really have
to, you may be able to do this:
require 'sys/syscall.ph';
$rc = syscall(&SYS_close, $fd + 0); # must force numeric
die "can't sysclose $fd: $!" unless $rc == -1;
=head2 Why can't I use "C:\temp\foo" in DOS paths? What doesn't `C:\temp\foo.exe` work?
Whoops! You just put a tab and a formfeed into that filename!
Remember that within double quoted strings ("like\this"), the
backslash is an escape character. The full list of these is in
L<perlop/Quote and Quote-like Operators>. Unsurprisingly, you don't
have a file called "c:(tab)emp(formfeed)oo" or
"c:(tab)emp(formfeed)oo.exe" on your DOS filesystem.
Either single-quote your strings, or (preferably) use forward slashes.
Since all DOS and Windows versions since something like MS-DOS 2.0 or so
have treated C</> and C<\> the same in a path, you might as well use the
one that doesn't clash with Perl -- or the POSIX shell, ANSI C and C++,
awk, Tcl, Java, or Python, just to mention a few.
=head2 Why doesn't glob("*.*") get all the files?
Because even on non-Unix ports, Perl's glob function follows standard
Unix globbing semantics. You'll need C<glob("*")> to get all (non-hidden)
files.
=head2 Why does Perl let me delete read-only files? Why does C<-i> clobber protected files? Isn't this a bug in Perl?
This is elaborately and painstakingly described in the "Far More Than
You Every Wanted To Know" in
http://www.perl.com/CPAN/doc/FMTEYEWTK/file-dir-perms .
The executive summary: learn how your filesystem works. The
permissions on a file say what can happen to the data in that file.
The permissions on a directory say what can happen to the list of
files in that directory. If you delete a file, you're removing its
name from the directory (so the operation depends on the permissions
of the directory, not of the file). If you try to write to the file,
the permissions of the file govern whether you're allowed to.
=head2 How do I select a random line from a file?
Here's an algorithm from the Camel Book:
srand;
rand($.) < 1 && ($line = $_) while <>;
This has a significant advantage in space over reading the whole
file in.
=head1 AUTHOR AND COPYRIGHT
Copyright (c) 1997 Tom Christiansen and Nathan Torkington.
All rights reserved. See L<perlfaq> for distribution information.
--
Tom Christiansen tchrist@jhereg.perl.com
"If ease of use is the highest goal, we should all be driving golf carts."
--Larry Wall
------------------------------
Date: 8 Mar 97 21:33:47 GMT (Last modified)
From: Perl-Request@ruby.oce.orst.edu (Perl-Users-Digest Admin)
Subject: Digest Administrivia (Last modified: 8 Mar 97)
Message-Id: <null>
Administrivia:
The Perl-Users Digest is a retransmission of the USENET newsgroup
comp.lang.perl.misc. For subscription or unsubscription requests, send
the single line:
subscribe perl-users
or:
unsubscribe perl-users
to almanac@ruby.oce.orst.edu.
To submit articles to comp.lang.perl.misc (and this Digest), send your
article to perl-users@ruby.oce.orst.edu.
To submit articles to comp.lang.perl.announce, send your article to
clpa@perl.com.
To request back copies (available for a week or so), send your request
to almanac@ruby.oce.orst.edu with the command "send perl-users x.y",
where x is the volume number and y is the issue number.
The Meta-FAQ, an article containing information about the FAQ, is
available by requesting "send perl-users meta-faq". The real FAQ, as it
appeared last in the newsgroup, can be retrieved with the request "send
perl-users FAQ". Due to their sizes, neither the Meta-FAQ nor the FAQ
are included in the digest.
The "mini-FAQ", which is an updated version of the Meta-FAQ, is
available by requesting "send perl-users mini-faq". It appears twice
weekly in the group, but is not distributed in the digest.
For other requests pertaining to the digest, send mail to
perl-users-request@ruby.oce.orst.edu. Do not waste your time or mine
sending perl questions to the -request address, I don't have time to
answer them even if I did know the answer.
------------------------------
End of Perl-Users Digest V8 Issue 93
************************************
